[asterisk-users] Server recommendation help

[Cavanna, Richard]

On Tue, May 20, 2008 at 07:55:32AM -0500, Cavanna, Richard wrote:
> I am having a issues with adding a analog card to my dell 2800.  I
> already have a t1 card installed and running fine but when I install
the
> analog card asterisk will not start (ztcfg fails).  I have determined
it
> is because of a IRQ problem and have decided to get a new server.  Can
> anyone suggest a server grade setup that supports this?  I would
rather
> not buy a machine that will be unstable.  I am not opposed to building
> one if need be.

You omit some obvious details, such as the actual error message you get,
your /etc/zaptel.conf and the output of 'cat /proc/zaptel/*' . 

I figure that the driver for the analog card loads before the driver for
the T1 card, hence invalidating your configuration.

>   
> 
> Cards I have installed:
> Digium 	TE205P - 5v
> 		TDM410

Thanks for the offer to help trouble shoot but I never even got that
far.  On boot it actually makes my Ethernet ports fail.  I am thinking
of disabling the internal ports and adding in a card.  Might help but as
this box is in production I do not have the ability to do that much
testing on it. I am looking at some planned downtime next weekend to go
further with this. 

Also this box is ~3 years old so I figure If I can find a box that is
not "too" expensive I can migrate this to a FTP box and get a new *
server. As added bonus I can use the reload to clean up my dial plan.

If anyone has a TE205P-5v and TDM410 running is same box I would like to
know the setup.

Richard 


--
This message was scanned by ESVA and is believed to be clean.