[asterisk-users] Inbound Answer not working

[Joseph L. Casale]

Hi,
I am just testing Asterisk with a softphone on a fedora box until my ip phones arrive
and have a basic config so far. I am a bit confused over how to setup the inbound.conf
file now. It appears as if outbound and demo works so far.

Any hints would be greatly appreciated!
jlc

My sip.conf is as follows:
[general]
context=default
allowguest=yes
disallow=all
allow=ulaw
dtmfmode=rfc2833
canreinvite=no

[100]
type=friend
context=default
disallow=all
allow=ulaw
host=dynamic
username=100
secret=100

register => username:password at sip.domain.com:5060
register => username:password at sip.domain.com:5060

[carrier-sw1]
context=default
type=friend
host=sip.domain.com
username=username
secret=password
canreinvite=no
insecure=port,invite
qualify=5000
dtmfmode=auto
nat=no
disallow=all
allow=ulaw

[carrier-sw2]
**similar to above**

My extensions.conf is as follows:
[general]
static = yes
writeprotect = no
clearglobalvars = no

[globals]
CONSOLE = Console/dsp

[local]
include => default
#include outbound.conf
#include inbound.conf

[default]
include => demo
include => inbound
include => outbound

[demo]
exten => _700,1,wait(1)
exten => _700,2,answer()
exten => _700,3,wait(1)
exten => _700,4,playback(tt-weasels)
exten => _700,5,hangup()

[macro-dialxxxx]
exten => s,1,Dial(SIP/${ARG1}@xxxx-sw1,120)
exten => s,2,Goto(s-${DIALSTATUS},1)
exten => s-ANSWER,1,Hangup
exten => s-CONGESTION,1,Dial(SIP/${ARG1}@xxxx-sw2,120)
exten => s-CONGESTION,2,Goto(ss-${DIALSTATUS},1)
exten => s-CANCEL,1,Hangup
exten => s-BUSY,1,Busy(30)
exten => s-CHANUNAVAIL,1,Dial(SIP/${ARG1}@xxxx-sw2,120)
exten => s-CHANUNAVAIL,2,Goto(ss-${DIALSTATUS},1)
exten => ss-ANSWER,1,Hangup
exten => ss-CONGESTION,1,Congestion(30)
exten => ss-CANCEL,1,Hangup
exten => ss-BUSY,1,Busy(30)
exten => ss-CHANUNAVAIL,1,Congestion(30)

My outbound.conf is as follows:
[outbound]
; NANPA
exten => _1NXXNXXXXXX,1,Macro(dialxxxx,${EXTEN})
; International Calling
exten => _011.,1,Macro(dialxxxx,${EXTEN})