[asterisk-users] [asterisk-dev] UWB Codec / Command-line softphone help

[Tzafrir Cohen]

On Wed, May 14, 2008 at 10:15:01AM +0200, Koch Máté wrote:
> > Tim Panton wrote:
> > > I think that if you use meetme, you will automatically drop to 8khz
> > > sampling because that is what zaptel uses to do the mixing.
> > >
> > > If you want wideband, you will probably need to make one-to-one calls.
> >
> > That is correct.
> >
> > However, if you install Josh's bridging branch (asterisk/team/file/bridging),
> > and use the ConfBridge application, you can get wideband conferencing.
> >
> > However, you still need a softphone that supports a wideband codec.  If you are
> > actually preferring a command line softphone, then my preference is actually to
> > just use Asterisk.  It can act as a pretty powerful and highly configurable
> > softphone.  :)
> >
> > If you use Asterisk as the softphone, then use chan_console.  It is set up to
> > operate in 16 kHz natively.  Also, use G.722 as the codec between the servers.
> 
> Hello,
> 
> thank you very much for help. Is there any tutorial about how to
> configure this,
> what to install and so?

How to use Asterisk as a wide-band soft-phone using a local sound card?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir