[asterisk-users] Out-Going Calleriid

[Eric Wieling]

The leading 0 is not part of Caller*ID.  Remove it.

Tim Guy wrote:
> Installing a new box onto UK NTL (Virgin Media)
> 
> During testing phase the callerid worked, now it doesn't.
> 
> Can someone confirm that my syntax is right before I start ripping the
> configs to bits
> 
> exten => _9.,1,Set(CALLERID(number)=01926xxxxxx)
> exten => _9.,2,Dial(ZAP/1/${EXTEN:1})
> 
> Ive tried all permutations of the CALLERID (ie CALLERID(NAME) and
> CALLERID(NUMBER) but it just wont work anymore.
> 
> Zapata has the following relevant settings
> 
> usecallerid=yes 
> hidecallerid=no 
> callwaiting=yes
> 
> Im Stumped
> 
> Tim
> 
> This message is sent in confidence for the addressee only. Unless specifically stated, the contents are not to be disclosed to anyone other than the addressee. Unauthorised recipients must preserve this confidentiality and should please advise the sender immediately of any error in transmission. The views an opinions expressed in this e-mail message are the sender's own and do not necessarily represent the views and opinions of NS Optimum Ltd. Although this e-mail and attachments are believed to be free of any virus or other defects which may affect any computer or IT systems into which they are received, no responsibility is accepted by NS Optimum Ltd for any loss or damage arising in any way from the receipt or use thereof.
> 
> Place of registration: England, Registered Office: Jenton Road, Sydenham Ind Est, Leamington Spa, Warwickshire, CV31 1XS, Registered No 3018839
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

-- 
Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, 
T-1, PRI, Frame Relay, Linux, and network design.  Based near 
Birmingham, AL.  Now accepting clients worldwide.