[asterisk-users] Zap channels on TDM400P report to be unimplemented after upgrade from Asterisk 1.2 to 1.4 - (cause 66 - Channel not implemented error)

[Matthew Fredrickson]

Steve Totaro wrote:
> My question is does ANYONE do ANY testing on these releases?  It would
> seem that this bug is so paramount to the purpose of the code that had
> anyone taken a MINUTE to TEST, it would have been discovered
> IMMEDIATELY.

Not if you already had a zaptel udev rules script installed on the 
system that's used as the test machine.

This was a regression do to recent Makefile changes.  A test for this 
problem has now been added to our pre-release regression testing.

Matthew Fredrickson

> 
> sigh.....
> 
> Thanks,
> Steve Totaro
> 
> On Wed, Apr 30, 2008 at 8:41 AM, Steve Totaro
> <stotaro at totarotechnologies.com> wrote:
>> Sean Bright to Asterisk
>>
>>  show details 4:47 PM (15 hours ago)
>>
>>  There is a bug in 'make install' in Zaptel 1.4.10 that causes the
>>  devices to not be installed correctly.  You can either install 1.4.9 or
>>  wait for 1.4.11 to be released.
>>
>>
>>
>>  On Wed, Apr 30, 2008 at 8:22 AM, Zoran Milenkovic, Datatek d.o.o.
>>  <zoran at datatek.co.yu> wrote:
>>  >
>>  >
>>  > Hi list!
>>  >
>>  >
>>  >
>>  > I have RHEL Server rel5 (Tikanga) 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21
>>  > EST 2007 i686 i686 i386 GNU/Linux
>>  > with installed digium packets
>>  >
>>  > 1. Asterisk 1.4.19
>>  > 2. Zaptel 1.4.10
>>  > 3. Libpri 1.4.3
>>  >
>>  >
>>  >
>>  > My Digium hardware is
>>  >
>>  > [root at asterisk ~]# zaptel_hardware
>>  > pci:0000:04:00.0     wctdm+       e159:0001 Wildcard TDM400P REV I
>>  >
>>  > ...and I have 2 FXO and 2 FXS ports installed inside the TDM400P card
>>  >
>>  >
>>  >
>>  > The problem is the asterisk doesn't recognize the Zap channels at all. The
>>  > error is "No channel type registered for 'Zap'
>>  > " and "Unable to create channel of type 'Zap' (cause 66 - Channel not
>>  > implemented)" and there is the original output form Astersik console:
>>  >
>>  >     -- Executing [12 at local:1] Dial("SIP/zoran-09f1bf90", "Zap/3|20") in new
>>  > stack
>>  > [Apr 30 13:17:48] WARNING[2845]: channel.c:3001 ast_request: No channel type
>>  > registered for 'Zap'
>>  > [Apr 30 13:17:48] WARNING[2845]: app_dial.c:1183 dial_exec_full: Unable to
>>  > create channel of type 'Zap' (cause 66 - Channel not implemented)
>>  >   == Everyone is busy/congested at this time (1:0/0/1)
>>  >     -- Executing [12 at local:2] Hangup("SIP/zoran-09f1bf90", "") in new stack
>>  >   == Spawn extension (local, 12, 2) exited non-zero on 'SIP/zoran-09f1bf90'
>>  >
>>  >
>>  > And everything was working quite fine when I was on asterisk 1.2.13,
>>  > previously installed on this very same server, same Digium card etc.
>>  >
>>  > The configurations are totaly the same, also.
>>  >
>>  > What could be the resolution of this problem?
>>  >
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


-- 
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.