[asterisk-users] Question about PCI Slots for DIGIUMs Boards
Peter Lindquist
peter.lindquist.th at gmail.com
Mon Mar 31 12:27:11 CDT 2008
Dear list, this is getting ridiculous - I would read the specs and
compare....
From the link below it says:
* Two Available PCI Express x8 Slots
* Two Available PCI Express x8 Low Profile Slots
* One Available 64-bit/100MHz PCI-X slot
The list has already answered what goes in what slot so I won't repeat
that. It is a 1U unit and the above taken directly from the specs at :
http://www.penguincomputing.com/index.php?option=com_content&task=view&id=386&Itemid=598
Oh, will repeat some...
"Digium's TE420 PCI Express card provides termination of up to 120
channels of voice or data across four E1, T1, or J1 interfaces in a PCIe
x1 form factor. Selectable on a per-port or per-card basis, the TE420
allows E1 and T1 circuits to be mixed with full channel synchronization.
Supporting PCIe x1, the TE420 may be used in any available PCIe 1.0
compliant slot - 1x, x4, x8, and x16 without consider"
So, you can fit 2 of those in the: "Two Available PCI Express x8 Slots"
Forget about the 2 low profile slots when it comes to Digium....and
AFAIK everyone else too...
For the PCI-X (if penguin computing can confirm that it is at least half
length) slot you may use for example OpenVox D410P, that will work. When
it comes to the Digium cards I can't say but Digium sales should be to
tell you which one (5.5V or 3.3V or none of them). I am sure their cards
do work, as would several other manufacturers cards (don't have the
experience with them yet). E.g. PIKA says: "Slot Requirements: Standard
x86 PCI Half-size Slot (Compatible with PCI-X slot)" for their PIKA for
Asterisk T1/E1 PCI card. So that should work.
I would say - kind of forget about the 2 half height PCI Express slots
as AFAIK no one is providing half-height E1/T1 cards.
//Peter - short and always getting flamed....
Al Baker wrote:
> Thank you for all your time om your most detailed response.
> It is extremely helpful.
>
> The vendor's web page is
> http://www.penguincomputing.com/index.php?option=com_content&id=170&Itemid=209&task=view&sysid=10007609
>
>
> *PCI EXPANSION SLOTS*
> Number of Slots 5
> Slot Speed PCI Express: two x8 slots, two x8 low profile slots;
> PCI-X: 64-bit/100MHz
>
>
> or if that doesn't display
>
>
>> *PCI EXPANSION SLOTS*
>> Number of Slots 5
>> Slot Speed PCI Express: two x8 slots, two x8 low profile slots;
>> PCI-X: 64-bit/100MHz
>>
>>
>
> or
> PCI EXPANSION SLOTS
> Number of Slots 5
> Slot Speed PCI Express: two x8 slots, two x8 low profile slots;
> PCI-X: 64-bit/100MHz
>
>
>
>
> Nick Seraphin wrote:
>
>> On Sat, 29 Mar 2008, Al Baker wrote:
>>
>>
>>
>>> Detailed specs for the "types" of PCI slots on the system were posted
>>> each and every time I posted int the line
>>>
>>>
>> Actually, your description wasn't 100% clear at all.
>>
>>
>>
>>> _PCI Express_*: _two x8 slots*_, _two x8 low profile slots*_; *_PCI-X:
>>> 64-bit/100MHz_* "
>>>
>>>
>> 1) This description seems to IMPLY that there are 5 slots total. Do you
>> know if this is in fact correct? It implies there are 2 PCI-E x8 slots, 2
>> PCI-E x8 low profile slots, and 1 PCI-X slot. I wouldn't rely on that
>> however without talking to the vendor.
>>
>> 2) The first "PCI Express:" heading would normally imply that the slots
>> listed afterwards are ALL PCI Express slots, however PCI-X is not PCI
>> Express, so the vendor's description is confusing and misleading.
>>
>> 3) All these damn *'s you keep inserting, are those all done by you, or
>> are some of them from the web page description? Most of the time when
>> something has a * by it that means it's conditional on a footnote that
>> appears at the bottom of the section or page. Are there footnotes we need
>> to know about to clarify this?
>>
>> 4) Is this a rackmount server or a tower case? If rackmount, is it a 1u
>> server or a 2u server or a 4u server? Just because the motherboard has 5
>> slots doesn't mean the case it is installed in will support 5 cards. A 1u
>> case rarely supports more than 1 or 2 cards, and always requires a riser
>> card. A 2u server rarely supports more than 2 cards unless they are
>> low-profile. A 4u server might allow 5 cards, IF the case is designed
>> with 5 slot openings in the back.
>>
>> 5) Are all the card slots open and available to you at time of shipping?
>> Many options a customer orders with a server, such as a RAID controller or
>> additional network ports will fill one or more of the available slots.
>> You need to be sure all the slots you need are available to you when you
>> get the server.
>>
>> As for types of cards. As others have already said, PCI-X is not
>> PCI-Express and they are not interchangeable.
>>
>> A PCI-Express card slot can accomodate any PCI-Express card with the same
>> number of lanes or less. So an x8 slot (8 lanes) will support an x1, x2,
>> x4, or x8 card, but not an x16 card. I believe the Digium PCI Express
>> cards are only x1 (one lane) so they should fit in any PCI Express slot,
>> but you should check with Digium's web site to be 100% sure the card you
>> are buying is a x1 card.
>>
>> Unless you specifically buy a low-pofile card, a normal PCI or PCI Express
>> Card will NOT fit in a low-profile slot. So assuming Digium's cards are
>> full height, you only have 3 possible options. The 2 PCI Express full
>> height slots, and the 1 PCI-X slot, assuming all those slots are open and
>> will be available with the case you're using.
>>
>> I would NOT base my purchasing decision on that vague description given by
>> the vendor that you have listed in your messages. I would contact the
>> vendor and clarify the total number of slots, types of slots, whether they
>> are open or not, and whether the case will support them all.
>>
>> Many vendors will use a motherboard with 3-5 slots on the board, in a 1u
>> rackmount case that only supports 1 physical card.
>>
>> One final word of warning... don't try to stick too many cards in one box
>> without double checking with someone who can tell you if it will handle
>> that capacity or not. There were a lot of problems with early Digium
>> 4-port T1 cards where you couldn't use more than 1 or 2 cards at a time
>> because of the interrupts. The newer cards, especially PCI Express, may
>> not have that problem anymore... but I would double check before
>> proceeding with more than 2 cards in one box.
>>
>> Can anyone out there clarify (for me as well) whether you can put, say, 4
>> or 5 4-port T1 cards in a single box now and have it work ok? Assuming
>> enough RAM and a fast enough CPU of course.
>>
>> -- Nick
>>
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080401/fa6d7a32/attachment.htm
More information about the asterisk-users
mailing list