[asterisk-users] FXS channel banks

[Paul Hales]

I think you can set callerid's in zaptel.conf for each analog port - I
did that for a client a while ago. (from memory)

PaulH


On Wed, 2008-03-26 at 15:53 +1100, Lee, John (Sydney) wrote:
> > Good to here,
> > I know the time off set US -> AU is terrible when you need support.
> 
> I have continued to configure the analogue phone by just adding new
> extensions (just like any VOIP phone) to extensions.conf as follows:
> exten => 5162,1,SetMusicOnHold(cpwr)
> exten => 5162,n,Dial(Zap/32,20)
> exten => 5162,n,VoiceMail,5162
> exten => 5162,n,Playback(vm-goodbye)
> exten => 5162,n,Wait(2)
> exten => 5162,n,HangUp()
> 
> I was able to call out and call in.
> However, I noticed that if I dial from the analog phone to a VOIP phone,
> "asterisk" shows up as the dialler on the VOIP phone.  This is because
> it is not registered in SIP.
> 
> Because I think analog phone does not use SIP, so I thought I don't need
> to configure sip.conf.  Am I correct?  Did I miss anything in
> configuring an analog phone?
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users