[asterisk-users] FXS channel banks

[Paul Hales]

Have you tried setting the card as being T1 instead of E1 for the port
connected to the channel bank?

PaulH


On Tue, 2008-03-25 at 15:33 +1100, Lee, John (Sydney) wrote:
> > Any luck with the channel bank?
> Thanks for the reminder Paul but so far no luck.
> 
> I have been getting: 
> 1) *** Initialising: Trying to frame D4 / ESF on the channel bank
> 2) Red flashing light on port 2 of the TE412P card
> 
> I have checked a few things here and there but I think I must have
> missed some basic stuff.  The funny thing is before I purchase the Rhino
> channel bank, I have been assured that it will work although we are
> using E1 downunder.  Here is my configuration:
> 
> Asterisk box
> TE412P     Port 1 <---> E1
>            Port 2 <---> Rhino 24 port FXS (CB24-FXS-UNIV)
>            Port 3
>            Port 4
> 
> [zaptel.conf]
> #
> # E1
> #
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> bchan=17-21
> unused=22-31
> dchan=16
> #
> # Rhino 24-port Channel Bank
> #
> span=2,0,0,esf,b8zs
> fxols=32-55
> 
> Any thoughts?
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users