[asterisk-users] Is Asterisk ready for Prime-Time?

[Steve Totaro]

On Thu, Mar 20, 2008 at 3:01 PM, RE Kushner List Account <lists at darl.com> wrote:
> Al Baker wrote:
>  > Quote"
>  >
>  > This code is pre-Asterisk 1.0... It processes quite a few calls daily, I
>  > have about 1,800 DID numbers pointed at it, "
>  >
>  > Are you SURE on that figure. Since you cold have at MOST 4 T1's coming into that box, 1,800  DIDs pointing to it sems like
>  > one hell of a congestion problem and a Dialplan thicker than War and Peace
>  >
>  >
>  I said DID numbers, they point to a PRI trunk group to a T400P, then the
>  calls go IAX2 to other boxes for processing based on NPA/NXX.
>
>  IE: exten=>_906586XXXX,1,Dial,IAX2/un:pw at asterisk50/${EXTEN}@ninezerosix
>
>  And if anything comes in for something not configured this catches it
>
>  exten => _NXXXXXXXXX,1,Dial,sip/sipdebug/s
>
>  If you figure standard telco usage patters, 92 channels @ 25:1 ratio, I
>  have quite a bit of headroom.
>
>
>
>  -Ron
>

You don't run into choppy audio with IAX that way?  I see that alot
and the simple solution is to switch to SIP, almost always solves the
problem right away.

Thanks,
Steve Totaro