[asterisk-users] ldap for sip users.

[sasikala kala]

Hi,
  I had asterisk 1.4.17 with the extensions which is
configured in the sip.conf it was working fine.
  Now I am having the requirement to authenticate the
SIP users through the OpenLDAP not through the
sip.conf.
Steps I have done :
Did a check out by using the following command,
http://svn.digium.com/svn/asterisk/trunk. [^]
then given configure, make , make install. and taken
the sample ldap configuration file and changed host
and dn configuration.
then in the /etc/asterisk/modules.conf file given load
=> res_config_ldap.so
then executed asterisk.
*CLI> module show like ldap
Module Description Use Count
res_config_ldap.so LDAP realtime interface 0
1 modules loaded

then I gave a command ,
*CLI> realtime ldap status
Command 'realtime ldap status' failed.

In the log file the information is available is ,
[Mar 15 14:12:41] VERBOSE[15306] logger.c: == Parsing
'/etc/asterisk/res_ldap.conf': [Mar 15 14:1
2:41] VERBOSE[15306] logger.c: == Found
[Mar 15 14:12:41] WARNING[15306] res_config_ldap.c: No
directory port found, using 389 as default.
[Mar 15 14:12:41] WARNING[15306] res_config_ldap.c:
bind failed: Invalid DN syntax
[Mar 15 14:12:41] WARNING[15306] res_config_ldap.c:
Couldn't establish connection. Check debug.
[Mar 15 14:12:41] NOTICE[15306] config.c: Registered
Config Engine ldap
[Mar 15 14:12:41] VERBOSE[15306] logger.c: LDAP
RealTime driver loaded.
[Mar 15 14:12:41] VERBOSE[15306] logger.c:
res_config_ldap.so => (LDAP realtime interface )

when i put telnet to the ldap server ip to the port
number 389 it is connecting.

Please tell me the steps I have done .. is it right?
I think many people made this to work...
If you give some way to go about do this , it would be
very helpful for me..

Thanks in advance
sasikala.


      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs