[asterisk-users] DID T1 PRI

[broadband Voice]

Can you share with me sample extensions.conf? This is what I have

exten => 215xxxxxxx,1,Dial(Zap/1)

in zapata.conf


[channels]
context=external
switchtype=ni1
resetinterval=3600
overlapdial=no
priindication=outofband
facilityenable=yes
signalling=pri_cpe
usecallerid=yes
cidsignalling=bell
hidecallerid=no
restrictcid=no
usecallingpres=yes
echocancel=yes
callerid=asreceived
faxdetect=incoming
nsf=sdn
group=1
channel=>1-23

zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24






On 3/15/08, Darren Wright <dwright at d2-tech.com> wrote:
>
> Feel free to ping me off list.  I've setup quite a few Cavtel PRI's with
> *.the paperwork they asked you to setup?
>
> Typically, they only send 4 digits.
>
> Do you have the questionnare they asked you to fill out?
>
> dwright at d2 - tech dot com.
>
> ________________________________
>
> From: asterisk-users-bounces at lists.digium.com on behalf of broadband Voice
> Sent: Fri 3/14/2008 9:04 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] DID T1 PRI
>
>
> Thanks. I am in Philly. I may have to configure the extensions.conf well
> to pass the incoming channels.
>
>
> On 3/14/08, Steve Totaro <stotaro at totarotechnologies.com> wrote:
>
>        On Fri, Mar 14, 2008 at 8:13 PM, broadband Voice
>        <broadbandvoice at gmail.com> wrote:
>        > I had Cavalier turn up a T1 PRI. How can I put in the DIDs to
> direct to
>        > Asterisk. Here is a log
>        >
>        >
>        >
>        > Zaptel Tool (C)2002 Linux Support Services, Inc.
>        >          ââââââââââââââââ⤠T2XXP (PCI) Card 0 Span 1
>        > ââââââââââââââââââ[3;10Hâterfaces âââââââââââââââââ âââââ[3;37Hâ
>        > â      â
>        >
>
> >          â                                                            â
>        > â
>        >          â    Current Alarms:     No
> alarms.                          â rd 0
>        > Span 1                       â  â
>        >           â    Sync Source:        T2XXP (PCI) Card 0 Span
> 1           â rd
>        > 0 Span 2                       â(R)  â
>        >          â    IRQ Misses:
> 0                             â
>        > â  â
>        >           â    Bipolar Viol:
> 0                             â
>        > â  â
>        >          â    Tx/Rx Levels:
> 0/  0                             â
>        > â(R) â
>        >           â    Total/Conf/Act:      24/
> 24/  0                         â
>        > â  â
>        >          â
> 111111111122222                ââââââââ   â
>        > â  â
>        >           â        123456789012345678901234                â Back
> â    â
>        > â  â
>        >          â    TxA
> ------------------------                ââââââââ    â
>        > â  â
>        >           â    TxB
> ------------------------                            â
>        > â  â
>        >          â    TxC
> ------------------------                            â
>        > â
>        >           â    TxD
> ------------------------                            â
>        > â
>
> >          â                                                ââââââââ   â14Câ
>        >          â    RxA ------------------------                â Loop
> â    â
>        > â Quit â              â
>        >           â    RxB
> ------------------------                ââââââââ    â
>        > ââââââââ              â
>        >          â    RxC
> ------------------------                            â
>        > â
>        >           â    RxD
> ------------------------                            â
>        > ââââââââââââââââââââââââââââââââââââââ
>
> >          â                                                            â
>
> >          ââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââ
>        >
>        > T2XXP (PCI) Card 0 Span 1
>        > F10=Back
>        >
>        >
>        > I need to add 215-xxx-xxxx etc to come in to the Asterisk box.
>        >
>        >
>
>        Do you have DIDs already?  When you call a DID and watch the
> Asterisk
>        console with a little verbose, you should see the call come and how
>        many digits the telco is sending.
>
>        Then you need to make matching entries for those DIDs either in the
>        form of exact matches or pattern matches to do pretty much whatever
>        you can imagine.
>
>        Are you in Philly?
>
>        Thanks,
>        Steve Totaro
>
>        _______________________________________________
>        -- Bandwidth and Colocation Provided by http://www.api-digital.com<
> http://www.api-digital.com/>  --
>
>        asterisk-users mailing list
>        To UNSUBSCRIBE or update options visit:
>          http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> This message was sent from D2 Technology, INC.
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080315/b2bda2fe/attachment-0001.htm