[asterisk-users] CCM 6 and Asterisk routing again

[Aaron Fransen]

I'm at a loss. I have completely removed the route pattern and SIP trunk
from Call Manager, then added them again, and I get the same results.

Any ideas anyone?

On Tue, Mar 11, 2008 at 8:15 AM, Aaron Fransen <aaron.fransen at gmail.com>
wrote:

>
> On Tue, Mar 11, 2008 at 6:11 AM, Aaron Fransen <aaron.fransen at gmail.com>
> wrote:
>
> >
> > Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a
> > T1, Asterisk is running strictly VoIP over the network and using CCM as the
> > trunk.
> >
> > Calls from the SIP phones connected to Asterisk work fine. They can call
> > both external numbers and any Cisco extensions attached to CCM.
> >
> > Calls from CCM to Asterisk fail without any notification in Asterisk
> > (and I DID have this working at one point, but I suspect that our Telco may
> > have pooched the config somehow, since they're in the process of connecting
> > us to another CCM site).
> >
> > I have verified: Media Termination point exists, Calling Search Space
> > exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc),
> > and a route pattern exists to take calls to the right trunk.
> >
> > The system will let me complete the dialing sequence to the Asterisk
> > server, but as soon as I enter the last digit I get a busy signal.
> >
> > Thoughts anyone?
> >
> > Here's my sip.conf if that helps...
> >
> > [callman]
> > type=peer
> > context=incoming
> > insecure=very
> > host=(ip of my call manager server)
> > disallow=all
> > allow=ulaw
> > allow=alaw
> > nat=no
> > canreinvite=yes
> > qualify=yes
> >
> > Thanks! Aaron
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080312/0ab1cae4/attachment.htm