[asterisk-users] TDM400P dialout problem

[Martin]

My incoming calls work just fine with 1.4.9.2 and TDM400P but I'm completely 
unable to dial out the line.
even this doesn't work:
exten=>*903,1,Answer()
exten=>*903,n,Dial(Zap/3)
exten=>*903,n,Hangup()

I use this to pick up the line shared with analog phone. Zap/3 and Zap/4 are 
connected to PSTN. Sometimes I have luck with Zap/3 but not a single call 
through Zap/4

-- Executing [*903 at Martin:1] Answer("SIP/210-081e9968", "") in new stack
-- Executing [*903 at Martin:2] Dial("SIP/210-081e9968", "Zap/3") in new stack
-- Called 3
[2008-03-02 09:43:17] WARNING[5051]: chan_zap.c:4114 zt_handle_event:
Detected alarm on channel 3: No Alarm
-- Hungup 'Zap/3-1'
== Everyone is busy/congested at this time (1:0/0/1)

The alarm issue is not just annoyance....

What about downgrade Zaptel drivers...? Are they corrupted since 1.4.8? Im 
only afraid older versions won't compile with latest kernels (2.6.24 in my 
case) ... Sometimes its hard to find working combination of kernel and 
zaptel :-)
I will try the fix mentioned below first....
Martin

----- Original Message ----- 
From: "sean darcy" <seandarcy2 at gmail.com>
To: <asterisk-users at lists.digium.com>
Sent: 2. brezna 2008 17:29
Subject: Re: [asterisk-users] TDM400P dialout problem


>>>> In any event, as least for me the TDM400P seems to have problems with
>>>> zaptel svn - not just an annoyance.
>>> As I've mentioned previously, the changes to fix this for good (assuming
>>> they work properly) are in
>>> http://svn.digium.com/svn/zaptel/team/kpfleming/battery_alarms, although

How can I download this, do I need SVN installed....?

>>> one tester has reported that incoming calls don't work properly using
>>> that branch, so it still needs some work.
>>>
>> Got it. No more Red Alarms. Which is great.
>>
>> But...now I keep getting incomplete number messages from the co. No
>> trouble on the console: