[asterisk-users] TDM400P dialout problem

[Tzafrir Cohen]

On Sun, Mar 02, 2008 at 11:36:03AM -0500, sean darcy wrote:
> Kevin P. Fleming wrote:
> ...........................
> > The messages in bug 12099 are *not* errors, they are annoyances only.
> > The latest SVN branch 1.4 code of Asterisk will no longer generate them,
> 
> Using today's svn 3915:
> 
> ..........................
>   Answer("Zap/2-1", "") in new stack
>      -- Executing [2375678 at internal:2] Dial("Zap/2-1", "Zap/4/2375678") 
> in new stack
>      -- Called 4/2375678
> [Mar  2 11:15:35] WARNING[2320]: chan_zap.c:4424 zt_handle_event: 
> Detected alarm on channel 4: Red Alarm
>      -- Hungup 'Zap/4-1'
>    == Everyone is busy/congested at this time (1:0/0/1)
>      -- Executing [2375678 at internal:3] Congestion("Zap/2-1", "") in new 
> stack
> [Mar  2 11:15:35] NOTICE[2320]: chan_zap.c:7514 handle_init_event: Alarm 
> cleared on channel 4
>    == Spawn extension (internal, 2375678, 3) exited non-zero on 'Zap/2-1'
>      -- Hungup 'Zap/2-1'
> 
> zap show status
> Description                              Alarms  IRQ    bpviol CRC4 
> Fra Codi Options  LBO
> Wildcard TDM400P REV I Board 1           OK      0      0      0 
> CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)

This shows alarms on the whole span (the card). The alarms in question
are alarms on specific channels. The whole interface makes more sense in
the other meduims where the span usually corresponds to one physical
meduim.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir