[asterisk-users] Call Recordings...

[Dumpolid Exeplish]

Could you explain further?




On Thu, Jul 24, 2008 at 4:13 AM, Gregory Malsack <gmalsack at gmellc.com> wrote:
> I resolved this problem. The key was to get the right combination of self/callee and peer/caller. Read the instructions regarding the application map very closely. My problem was that I was not running the StopMixMonitor command against the proper channel. Even though mixmonitor records both channels simultaneously, the recording is only assigned to 1 channel and you have to run the command against the originating channel of the call.
>
> Greg
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gregory Malsack
> Sent: Wednesday, July 23, 2008 2:13 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Call Recordings...
>
> I'm getting close. The idea is based on the same principal as the link below. Here's what I have done thus far:
>
>  All calls are recorded via mixmonitor. This is part of the initial dialplan when the call comes in.
>  I then created an application map key sequence that is supposed to run stopmixmonitor. However I am unable to locate examples of syntax on that command. Here is what I have:
>
>    stoprecording => *8,self/callee,StopMixMonitor,
>
>  This command syntax does not work and the recording continues on. Can anyone provide direction on this?
>
> Thanks,
> Gregory Malsack
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Anselm Martin Hoffmeister
> Sent: Tuesday, July 22, 2008 4:24 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Call Recordings...
>
> Am Dienstag, den 22.07.2008, 14:53 -0500 schrieb Gregory Malsack:
>> Hello,
>>
>>
>>
>> My boss is asking me to setup the asterisk server to record all calls.
>> (Simple). However, he wants to be able to enter a key sequence during
>> the call to stop the recording. Any ideas on how I would do that?
>
> Hi Gregory,
>
> I found something about recording at
> http://www.voip-info.org/wiki/view/Asterisk+config+features.conf
>
> (second example). If you combine that with a default_recording_enabled (Monitor() call before Dial(), I would expect), that could be used to turn _off_ recording by pressing a key.
>
> I would not know though how to protect against the external call party pressing the same key.
>
> Best regards
>
> Anselm
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 6:55 AM
>
>
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 6:55 AM
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 6:55 AM
>
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.5.5/1568 - Release Date: 7/23/2008 6:55 AM
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>