[asterisk-users] Zaptel problem with pots lines

[Enrico Maistro]

Hi Marco,

Marco Signorini wrote:
> Hi Enrico.
> In Italy the polarity reversal is never used.

Good to know... at least i can stop messing with it.

> I'm using the TDM400 with an FXO port in Italy with the config reported
> below and is working properly in any situations:
> 
> --- zaptel.conf ---
> fxsks=1
> loadzone=it
> defaultzone=it

My zaptel.conf is exactly the same.

> --- zapata.conf ---
> [channels]
> language=en
> context=from-tdm-fxo
> signalling=fxs_ks
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> busydetect=yes
> busycount=6
> usecallerid=yes
> callerid=asreceived
> echocancel=yes
> echocancelwhenbridged=no
> relaxdtmf=yes
> rxgain=3.0
> txgain=0.0
> amaflags=billing
> group=1
> callgroup=1
> pickupgroup=1
> jbenable=yes
> faxdetect=no
> 
> channel => 1

My zapata.conf differs in:
language = it instead of en
rxgain = 0.0 instead of 3.0
jbenable = no instead of yes

Unfortunatly even with your exact same configuration nothing change.

> I'm using zaptel-1.4.6 and asterisk-1.4.20.1.

I'll give a try with zaptel-1.4.6...

> I hope this could help you.
> 
> Best regards,
> Marco Signorini.

Regards,
Enrico Maistro