[asterisk-users] How to integerate 2 TDM cards on same machine.

[Syed Nasruddin]

Thanks Noah.

It is now properly running. Thanks again

regards

Syed Nasruddin 


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Noah
Miller
Sent: Tuesday, July 15, 2008 9:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] How to integerate 2 TDM cards on same
machine.

Hi Syed -

> zttool shows that TDM800P is loaded first and TDM2401E is loaded
second. now problem is
> ports are not being configured by asterisk. i have done following
changes in two files
> zaptel.onf and zapata.conf.
>
> zaptel.conf
> loadzone=us, defaultzone=us,
> fxoks=1-4, fxsks=5-8, fxsks=9-32(or should this be fxoks???)
>
> zapata.conf
> signalling=fxoks
> channels =>1-4
>
> signalling=fxsks
> channels => 5-8
>
> signalling=fxsks
> channels => 9-32
>
> please see the bold lines. since FXO ports use FXS signalling so i
used fxsks. is this right or
> wrong. are these changes have to be made in both the files as i have
done or only in zaptel.conf
>
> waiting for information

Almost there.  Your zaptel.conf is correct (sorry I gave you the wrong
signalling before).  In zapata.conf, your signalling lines should look
like:

signalling=fxo_ks
channels => 1-4

signalling=fxs_ks
channels => 5-32


- Noah

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users