[asterisk-users] problem in making call pc to phone & vice versa

[Tzafrir Cohen]

Hi

On Thu, Jul 03, 2008 at 06:21:27PM +0530, Bikrish Amatya wrote:
> 
> 
> Hello everybody
> 
> 
> I have configures asterisk server
> and i
> am using TE220P digium card.  Here is the content of
> the
> /etc/zaptel.conf file 
> ###########################
> span=1,1,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
> 
> span=2,2,0,ccs,hdb3
> bchan=32-46,48-62
> dchan=47

You have two ports. Which of those is connected?

> 
> 
> loadzone        = in
> defaultzone     = in
> 
> ############################
> 
> the content of
> /etc/asterisk/zapata.conf is as follow
> 
> ############################
> [channels]
> context=incoming
> switchtype=national
> ;pridialplan=national
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> rxgain=0.0
> txgain=0.0
> immediate=no
> callprogress=no
> callerid=asreceived
> group=1
> channel=>1-15,17-31

Only the channels of ports 1 are configured in Asterisk?

> Output of  cat /prox/zaptel/1 is as follow
> 
> 
>     Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS RED
> 
>            1 TE2/0/1/1  Clear (In use) RED
>            2 TE2/0/1/2  Clear (In use) RED

[snip]

It is actually in use by Asterisk. It is also in RED alarm. That is: no
layer 1 connection to the remote side. One possible reason for thaat is
that there's nothing connected to that port.

No point trying to call through this port.

What do you have in /proc/zaptel/2 ?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir