[asterisk-users] Asterisk as useragent registered using 2 accounts

[Rizwan Hisham]

Thanx for the tip. It has erased the problem i was having using
authentication but another problem has arised. i am now able to call with
only one user from AST1 to AST2. If i dial using the other user, my AST2
shows the following warning and responds with a "403 forbidden"
sip response:

*WARNING[13520]: chan_sip.c:8117 check_auth: username mismatch, have <adf>,
digest has <abc>*

Any solutions to this problem?


On Wed, Feb 27, 2008 at 4:36 PM, Igor A. Goncharovsky <igi-go at ya.ru> wrote:

> Rizwan Hisham wrote:
> > I am having a strange problem. I am using my asterisk server AST1 to
> > register with another asterisk server AST2 using 2 accounts (2 register
> > commands in sip.conf). I have made 2 local users in AST1, and configured
> my
> > dialplan in such a way that both local accounts on AST1 use different
> trunks
> > to send the call to AST2 server. These 2 different trunks are for 2
> accounts
> > i have registered on AST1.
> > (skiped)
> >
> > How can i make asterisk realize it?
> >
> You must enable authentication of INVITE that AST1 send to AST2. Now you
> have no authentication of incoming INVITE and AST2 make decision about
> used account based only on IP address of caller peer.
>
> Changing insecure=port,invite to insecure=port should help.
>
> --
> Best regards,
> Igor A. Goncharovsky
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Best Regards
Rizwan Hisham
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080229/253ef5d6/attachment.htm