[asterisk-users] Unicall mfcr2 testcall issues in mexico outgoing:ok | incoming: fail.
Andres Tello Abrego
criptos at aullox.com
Wed Feb 27 20:03:55 CST 2008
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have a astunicall-1.4 setup with a te110p to a nortel pbx in Mexico.
(Hate R2!).
This is what I get when trying to call to * box using testcall:
./testcall
Chan 31, class 'mfcr2', variant 'mx,20,4', end 0, caller 0, from '' to ''
Loading protocol mfcr2
Thread for channel 0
MFC/R2 Chan 31: Call control(9)
MFC/R2 Chan 31: Unblock
MFC/R2 Chan 31: 1001 -> [1/BLOCKED /Idle /Idle ]
MFC/R2 Chan 31: far_unblocking_expired
MFC/R2 Chan 31: local_unblocking_expired
Chan 31: -- Far end unblocked! :-)
Chan 31: -- Far end unblocked! :-)
Chan 31: -- Local end unblocked! :-)
Chan 31: -- Local end unblocked! :-)
Main thread
MFC/R2 Chan 31: <- 0001 [1/IDLE /Idle /Idle ]
MFC/R2 Chan 31: Detected
MFC/R2 Chan 31: Creating a new call with CRN 32769
MFC/R2 Chan 31: 1101 -> [2/DETECTED/Seize ack /Seize ack ]
Chan 31: -- Detected on channel 0, CRN 32769
Chan 31: -- Detected on channel 0, CRN 32769
MFC/R2 Chan 31: <- 8 on [2/DETECTED/Seize ack /Seize ack ]
MFC/R2 Chan 31: 1 on -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 8 off [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 1 off -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 6 on [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 1 on -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 6 off [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 1 off -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 0 on [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 1 on -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 0 off [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 1 off -> [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: <- 0 on [2/DETECTED/Group A /DNIS request ]
MFC/R2 Chan 31: 6 on -> [2/DETECTED/Group C /Category req ]
MFC/R2 Chan 31: <- 0 off [2/DETECTED/Group C /Category req ]
MFC/R2 Chan 31: 6 off -> [2/DETECTED/Group C /Category req ]
Main thread
MFC/R2 Chan 31: R2 prot. err. [2/DETECTED/Group C /Category req ]
cause 32771 - T3 timed out
MFC/R2 Chan 31: 1001 -> [1/IDLE /Idle /Idle ]
Chan 31: -- Protocol failure on channel 0, cause (32771) T3 timed out
Chan 31: -- Protocol failure on channel 0, cause (32771) T3 timed out
MFC/R2 Chan 31: <- 1001 [1/IDLE /Idle /Idle ]
MFC/R2 Chan 31: 1001 -> [1/IDLE /Idle /Idle ]
Main thread
#cat testcall.conf
caller no
protocol-class mfcr2
protocol-variant mx,20,4
on-offered answer
circuits 31-31
When using testcall to test outcoing call everything is ok.
./testcall
Chan 31, class 'mfcr2', variant 'mx,20,4', end 0, caller 1, from '9900'
to '2254'
Loading protocol mfcr2
Thread for channel 0
MFC/R2 Chan 31: Call control(9)
MFC/R2 Chan 31: Unblock
MFC/R2 Chan 31: 1001 -> [1/BLOCKED /Idle /Idle ]
MFC/R2 Chan 31: far_unblocking_expired
MFC/R2 Chan 31: local_unblocking_expired
Chan 31: -- Far end unblocked! :-)
Chan 31: -- Far end unblocked! :-)
Chan 31: -- Local end unblocked! :-)
Chan 31: -- Local end unblocked! :-)
Chan 31: Initiating call
MFC/R2 Chan 31: Call control(1)
MFC/R2 Chan 31: Make call
MFC/R2 Chan 31: Creating a new call with CRN 32769
MFC/R2 Chan 31: 0001 -> [1/DIALING /Seize /Idle ]
Chan 31: -- Dialing on channel 0
Chan 31: -- Dialing on channel 0
MFC/R2 Chan 31: <- 1101 [1/DIALING /Seize /Idle ]
MFC/R2 Chan 31: 2 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 on [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 2 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 off [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 2 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 on [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 2 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 off [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 5 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 on [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 5 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 1 off [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 4 on -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 3 on [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 4 off -> [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: <- 3 off [2/DIALING /Group I /DNIS ]
MFC/R2 Chan 31: 1 on -> [2/PROCEED /Group II /Category ]
Chan 31: -- Proceeding on channel 0
MFC/R2 Chan 31: <- 1 on [2/PROCEED /Group II /Category ]
MFC/R2 Chan 31: 1 off -> [2/PROCEED /Group II /Category ]
MFC/R2 Chan 31: <- 1 off [2/PROCEED /Group II /Category ]
Chan 31: -- Alerting on channel 0
Chan 31: -- Alerting on channel 0
MFC/R2 Chan 31: <- 0101 [1/ALERTING/Await answer /Category ]
Chan 31: -- Connected on channel 0
Chan 31: -- Connected on channel 0
Chan 31: -- '*00000001*9900*2254*#'
Main thread
MFC/R2 Chan 31: <- 1101 [1/CONNECTD/Answered /Category ]
MFC/R2 Chan 31: Far end disconnected(cause=Normal Clearing [16]) -
state 0x400
Chan 31: -- Far end disconnected on channel 0
Chan 31: -- Far end disconnected on channel 0
MFC/R2 Chan 31: Call control(7)
MFC/R2 Chan 31: Drop call(cause=Normal Clearing [16])
MFC/R2 Chan 31: Clearing fwd
MFC/R2 Chan 31: 1001 -> [1/FAR DISC/Clear back B /Idle ]
MFC/R2 Chan 31: <- 1001 [1/FAR DISC/Clear fwd D /Idle ]
MFC/R2 Chan 31: Call disconnected(cause=Normal Clearing [16]) - state 0x800
Chan 31: -- Drop call on channel 0
Chan 31: -- Drop call on channel 0
MFC/R2 Chan 31: Call control(8)
MFC/R2 Chan 31: Release call
MFC/R2 Chan 31: Destroying call with CRN 32769
Chan 31: -- Release call on channel 0
Chan 31: -- Release call on channel 0
Chan 31: Initiating call
MFC/R2 Chan 31: Call control(1)
MFC/R2 Chan 31: Make call
MFC/R2 Chan 31: Creating a new call with CRN 32770
# cat testcall.conf
caller yes
protocol-class mfcr2
protocol-variant mx,20,4
destination-no 2254
originating-no 9900
Thanks in advance.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFHxhaLEXCJrml2yYoRAmrOAJ9SukPQPbSwGUrY/rLJmmdEXcubVgCfUxu/
oRmkg1i2MVFTYqp4vS3oxTA=
=BeLe
-----END PGP SIGNATURE-----
More information about the asterisk-users
mailing list