[asterisk-users] cannot dial out with latest zaptel and kernel 2.6.24

[John covici]

I updated zaptel and I can dial out, but when someone calls in it
won't hangup unless my extension hangs up, which was not true before.
This is a better state than before, thanks much for fixing so far.

on Tuesday 02/26/2008 Shaun Ruffell(sruffell at digium.com) wrote
 > John Covici wrote:
 > > Hi.  I am using asterisk 1.4 (latest as of today) and zaptel 1.4
 > > (latest as of today) and I cannot dial out using my 400P card with one
 > > fxs module and one fxo module.  I am using kernel 2.6.24 and get the
 > > following log entries:
 > > [Feb 25 17:28:13] VERBOSE[25071] logger.c:     -- Executing [s at macro-dialout-trunk:23] Dial("Zap/1-1", "ZAP/4/www411|300|wW") in new stack
 > > [Feb 25 17:28:13] DEBUG[25071] chan_zap.c: Dialing 'www411'
 > > [Feb 25 17:28:13] DEBUG[25071] chan_zap.c: Deferring dialing...
 > > [Feb 25 17:28:13] VERBOSE[25071] logger.c:     -- Called 4/www411
 > > [Feb 25 17:28:14] WARNING[25071] chan_zap.c: Detected alarm on channel 4: No Alarm
 > > [Feb 25 17:28:14] VERBOSE[25071] logger.c:     -- Hungup 'Zap/4-1'
 > > [Feb 25 17:28:14] VERBOSE[25071] logger.c:   == Everyone is busy/congested at this time (1:0/0/1)
 > > 
 > > Any assistance on this would be appreciated.
 > > 
 > 
 > It looks like this might have been a combination of zaptel generating 
 > battery alarms which asterisk 1.4 didn't recognize.
 > 
 > Could you try updating just zaptel and see if you still see the alarm?

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici at ccs.covici.com