[asterisk-users] TDM400P dialout problem

[sean darcy]

On Mon, Feb 25, 2008 at 3:42 AM, Anthony Messina <amessina at messinet.com> wrote:
> Using asterisk 1.4.18 and zaptel 1.4.9 on x86_64, I am having trouble dialing
>  out to the pstn. The call is initiated at Zap/1-1 and should exit via Zap/3.
>  I get the following:
>
>  -- Starting simple switch on 'Zap/1-1'
>  -- Executing [2111 at internal:1] Dial("Zap/1-1", "Zap/3/8801234") in new stack
>  [Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:1954 zt_call: Dialing '8801234'
>  [Feb 25 02:36:59] DEBUG[7194]: chan_zap.c:2030 zt_call: Deferring dialing...
>  -- Called 3/8801234
>  [Feb 25 02:37:00] WARNING[7194]: chan_zap.c:3835 zt_handle_event: Detected
>  alarm on channel 3: No Alarm
>  -- Hungup 'Zap/3-1'
>   == Everyone is busy/congested at this time (1:0/0/1)
>  [Feb 25 02:37:00] NOTICE[7082]: chan_zap.c:6678 handle_init_event: Alarm
>  cleared on channel 3
>
>  So the call fails and if I weren't using a test extension:
>  exten => 2111,1,Dial(Zap/3/8801234)
>
>  it would proceed in the dialplan.
>
>  asterisk]# cat /proc/zaptel/1
>  Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER)
>
>            1 WCTDM/0/0 FXOKS (In use)
>            2 WCTDM/0/1
>            3 WCTDM/0/2 FXSKS (In use)
>            4 WCTDM/0/3
>
>
>  Where do I go with this?
>
>  --
>  Anthony -  http://messinet.com - http://messinet.com/~amessina/gallery
>  8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E
>
> _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Look at http://bugs.digium.com/view.php?id=11855.

sean