[asterisk-users] Connecting a Rolm CBX to Asterisk via T1?

[Patrick]

Joshua,

On Tue, 2008-02-19 at 17:22 -0500, Joshua Kinard wrote:
> Okay, some more interesting tidbits to throw out incase someone has
> run into this before.
> 
> I've found out that th D100P has been EOL'ed by Digium due to it being
> a bit weird with certain systems, and I suspect my HP Proliant DL385
> server may be one of those.  Anyone used this card on such a system,
> running Suse (or at minimum, kernel 2.6.16.5x), and seen either PCI
> Master Aborts or NMI Errors being fired around in dmesg?

You probably mean a T100P? The single E1/T1 card? Been a few years but I
remember seeing the NMI Errors on a HP DL380 (the Intel dual Xeon
model).

> I moved the the D110P card out of what was a 100MHz PCI Slot and into
> a 133MHz PCI slot.  The PCI Master Aborts vanish, but get replaced by
> this:
> 
> Do you have a strange power saving mode enabled?

Unfamiliar with this one.

> Dazed and confused, but trying to continue

Seen this one. Actually now I think of it I've seen those as far back as
before Asterisk 0.7 with Dell servers.

The DL380 & T100P (E1) setup was only used in a test for a couple of
months and never taken into production so I don't have any recent data.

Regards,
Patrick