[asterisk-users] Unable to create channel of type 'Zap' with ecmg2 and kernel 2.6.23
Vieri
rentorbuy at yahoo.com
Wed Feb 20 04:07:05 CST 2008
Hi,
I have a working Asterisk 1.2 server on kernel 2.6.22
with the OSLEC echo canceller on a Digium PRI card.
I recently switched to kernel 2.6.23 with the MG2 echo
canceller (nothing else changed). Each time I try to
establish a call on the PRI line I get a congestion
signal.
in /var/log/asterisk/full:
Feb 20 08:09:43 VERBOSE[10657] logger.c: --
Executing Dial("SIP/4445-082e8340",
"Zap/g1/3666||tTW") in new stack
Feb 20 08:09:43 NOTICE[10657] app_dial.c: Unable to
create channel of type 'Zap' (cause 34 -
Circuit/channel congestion)
Feb 20 08:09:43 VERBOSE[10657] logger.c: == Everyone
is busy/congested at this time (1:0/1/0)
At first I thought that the new kernel version could
have been the culprit although I hadn't seen any
warnings in the Changelogs except that the most recent
zaptel is "compatible" with 2.6.24 (but I have
2.6.23).
Then I came across this post:
http://lists.digium.com/pipermail/asterisk-users/2006-August/162640.html
Could MG2 be the cause?
I can't easily test by enabling/disabling/changing
echo cancellation since I only have 1 PRI line and
it's in production.
I would like to know if other users have experienced a
similar issue.
In any case, how can I diagnose this (considering that
I need to do this within a minimal time frame)?
Could it be that an echo cancellation module renders a
zap interface "unusable"?
On the test server with an unconnected PRI card
(2.6.23 + mg2) I have:
Zaptel Tool (C)2002 Linux Support Services, Inc.
Wildcard TE120P Card 0
Current Alarms: Red Alarm
Sync Source: Internally clocked
IRQ Misses: 39
Bipolar Viol: 0
Tx/Rx Levels: 0/ 0
Total/Conf/Act: 31/ 31/ 0
1111111111222222222233
1234567890123456789012345678901
# lsmod | grep zaptel
zaptel 168356 65 wcte12xp
crc_ccitt 2304 1 zaptel
# ztcfg -vvv
Zaptel Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet
(DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels configured.
# zaptel_hardware
Argument "IRQ" isn't numeric in numeric comparison
(<=>) at
/usr/lib/perl5/5.8.8/i686-linux-thread-multi/Zaptel/Span.pm
line 114.
pci:0000:05:01.0 wcte12xp+ d161:0120 Wildcard
TE12xP
# lszaptel
Argument "IRQ" isn't numeric in numeric comparison
(<=>) at
/usr/lib/perl5/5.8.8/i686-linux-thread-multi/Zaptel/Span.pm
line 114.
### Span 1: WCT1/0 "Wildcard TE120P Card 0"
HDB3/CCS/CRC4 RED
Use of uninitialized value in string eq at
/usr/lib/perl5/5.8.8/i686-linux-thread-multi/Zaptel/Chans.pm
line 174.
Argument "IRQ" isn't numeric in printf at
/usr/sbin/lszaptel line 39.
0 unknown 39
1 PRI Clear (In use)
2 PRI Clear (In use)
3 PRI Clear (In use)
4 PRI Clear (In use)
5 PRI Clear (In use)
6 PRI Clear (In use)
7 PRI Clear (In use)
8 PRI Clear (In use)
9 PRI Clear (In use)
10 PRI Clear (In use)
11 PRI Clear (In use)
12 PRI Clear (In use)
13 PRI Clear (In use)
14 PRI Clear (In use)
15 PRI Clear (In use)
16 PRI HDLCFCS (In use)
17 PRI Clear (In use)
18 PRI Clear (In use)
19 PRI Clear (In use)
20 PRI Clear (In use)
21 PRI Clear (In use)
22 PRI Clear (In use)
23 PRI Clear (In use)
24 PRI Clear (In use)
25 PRI Clear (In use)
26 PRI Clear (In use)
27 PRI Clear (In use)
28 PRI Clear (In use)
29 PRI Clear (In use)
30 PRI Clear (In use)
31 PRI Clear (In use)
# cat /proc/zaptel/1
Span 1: WCT1/0 "Wildcard TE120P Card 0" HDB3/CCS/CRC4
RED
IRQ misses: 39
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
More information about the asterisk-users
mailing list