[asterisk-users] ISDN2 facility code...

[Paul Hales]

>From the local Digium reseller.

Not something you would have guessed though, is it?

I should probably enter this onto voip-info.org

later,

PaulH


On Tue, 2008-02-19 at 21:01 -0500, Michelle Dupuis wrote:
> Wow...where did you get that answer? 
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com 
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > Paul Hales
> > Sent: Tuesday, February 19, 2008 8:42 PM
> > To: Asterisk Users List
> > Subject: Re: [asterisk-users] ISDN2 facility code...
> > 
> > 
> > I have just been given the answer -
> > 
> > exten => *44,1,Answer
> > exten => *44,n,Noop(Check Callforward)
> > exten => *44,n,Set(_MISDN_KEYPAD=*#24#)
> > exten => *44,n,Dial(mISDN/1/)
> > exten => *44,n,Hangup
> > 
> > Where the line 'Set(_MISDN_KEYPAD=*#24#)' is where you set your code.
> > 
> > later,
> > 
> > PaulH
> > 
> > On Tue, 2008-02-19 at 12:07 +1100, Paul Hales wrote:
> > > I am guessing that 'not yet handled' is not good news.
> > >
> > > PaulH
> > >
> > >
> > > P[ 2] I IND :SETUP oad:383208100 dad:93409098 pid:415 
> > state:none P[ 2] 
> > > I SEND:PROCEEDING oad:0383208100 dad:93409098 pid:415
> > >     -- Executing Answer("mISDN/2-1", "") in new stack P[ 2] 
> > * ANSWER:
> > > P[ 2] I SEND:CONNECT oad:0383208100 dad:93409098 pid:415
> > >     -- Executing misdn_facility("mISDN/2-1", 
> > "calldeflect|83208106") 
> > > in new stack P[ 0] TYPE: mISDN P[ 2] I SEND:FACILITY oad:0383208100 
> > > dad:93409098 pid:415
> > >     -- Executing Wait("mISDN/2-1", "200") in new stack P[ 2] I IND 
> > > :CONNECT_ACKNOWLEDGE  oad:0383208100 dad:93409098 pid:415 
> > > state:CONNECTED P[ 2] I IND :FACILITY oad:0383208100 dad:93409098 
> > > pid:415 state:CONNECTED P[ 2]  --> not yet handled
> > >
> > >
> > >
> > > On Tue, 2008-02-19 at 10:45 +1100, Paul Hales wrote:
> > > > On Mon, 2008-02-18 at 08:11 -0500, Jared Smith wrote:
> > > > > On Mon, 2008-02-18 at 16:35 +1100, Paul Hales wrote:
> > > > > > I spoke to a telco tech and he said I had to send a facility
> > > > > > code....huh?
> > > > > >
> > > > > > Anyone with any ideas on this one?
> > > > >
> > > > > I know there's a setting in zapata.conf called 
> > "facilityenable" -- have
> > > > > you tried setting it to a value of "yes"?  I'm not sure 
> > that'll solve
> > > > > your problem, but it's probably worth a try.
> > > > >
> > > >
> > > > Since we are using a B410P (mISDN), is that still a valid setting?
> > > >
> > > > PaulH
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > -- Bandwidth and Colocation Provided by 
> > http://www.api-digital.com --
> > > >
> > > > asterisk-users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> > > _______________________________________________
> > > -- Bandwidth and Colocation Provided by 
> > http://www.api-digital.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > 
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> > 
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users