[asterisk-users] help with DAHDI hangup on calling out.

[Jerry Geis]

>
> Hangup Cause 99 is:
> =====================================
> An Information Element or Parameter Does Not Exist or is Not Implemented.
>
> Indicates that the equipment sending this cause has received a message 
> which includes information element(s)/parameter(s) not recognized 
> because the information element identifier(s)/parameter name(s) are not 
> defined or are defined but not implemented by the equipment sending the 
> cause.
> ======================================
>
> I suspect your carrier has not configured your service to permit dialing 
> out.
>
>   
I actually upgraded from a working configuration for over a year that 
was using
asterisk 1.4.18 and libpri 1.4.1 and zaptel 1.4.5.1

So everything was working. I then put on asterisk 1.4.22, libpri 1.4.7 
and DAHDI 2.1.0
and this is when I get the cause 99.

So the T1 is configured correctly. I backed out back to the old config 
and its working again.
What do I do? I'd like to not be on a stale path and use the new DAHDI.

Jerry