[asterisk-users] Zaptel / TDM400P card stopped working

[Brent Davidson]

Tilghman Lesher wrote:
> On Monday 15 December 2008 00:57:08 Langdon Stevenson wrote:
>   
>> Hi Paul
>>
>> Thanks for the reply.  I have removed and re-installed all of the Fedora
>> Zaptel packages with Yum.  I have the following installed:
>>
>>    asterisk-zaptel       1.4.12.1-1.fc8
>>    zaptel.i386           1.4.12.1-1.fc8
>>    zaptel-devel.i386     1.4.12.1-1.fc8
>>    zaptel-lib.i386       1.4.12.1-1.fc8
>>    zaptel-utils.i386     1.4.12.1-1.fc8
>>
>>
>> The command:
>>
>>    modprobe wctdm
>>
>> produces:
>>
>>    FATAL: Module wctdm not found.
>>     
>
> This probably means that the modules were compiled for a kernel other
> than the one you have installed.  You probably have multiple directories
> within /lib/modules, and the zaptel modules are in a directory other than
> what is listed with 'uname -r'.  In this case, compiling from source is
> probably your best bet.
>
>   
This may be an obvious thing, but you didn't mention checking whether or 
not the card was still seated in the slot properly after the move.  I 
know from experience that when you move offices, even if you take all 
the precautions possible, a card can get bumped just enough to jostle 
the connections loose.  Even if the card appears to be seated correctly 
I'd take it out and re-seat it.

Unfortunately it looks like you may have compounded the problem by 
removing and reinstalling the zaptel packages.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081215/31d36d86/attachment.htm