[asterisk-users] How to send a call to a Polycom SIP phone with NOcallerid whatsoever

[Mike]

Thanks, that makes plenty of  sense.  I thought I could only check if a
phone as busted it's call-limit, but I just tested and it works well.

 

 

Thank you!

 

Mike

 

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alexander
Lopez
Sent: Friday, December 12, 2008 1:49
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] How to send a call to a Polycom SIP phone with
NOcallerid whatsoever

 

If the page was ‘answered’ on the Polycom then it would NOT show up as a
missed call, a received call yes but not a missed call. If you are getting
missed calls from the page application, the users are probably ON the phone
when you page, if so you should put something in your dialplan that checks
to see if the phone is in use and if so do not send a page call to the
phone.

 

Alex

 

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mike
Sent: Thursday, December 11, 2008 7:13 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] How to send a call to a Polycom SIP phone with
NOcallerid whatsoever

 

I'm looking to send calls to a phone with no callerid data whatsoever shown
on the Polycom as far as missed call.

 

The specific application for this is that I have a 50 phone install with
some being used for paging.  Paging works perfectly, but the problem is that
for every page there is a "missed call" shown on the screen.

 

I have access to the Polycom phone.cfg file, and obviously to the Asterisk
.conf files.  Anything I can do?  Can I send a SIP header to say "don`t show
any call data on the screen"?

 

 

 

Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081212/656ab4bf/attachment.htm