[asterisk-users] about trasncoders

[Olivier]

2008/12/9 Shaun Ruffell <sruffell at digium.com>

> David fire wrote:
> > First zaptel is dahdi now....
> > second it isnot in /etc/dahdi or /etc/asterisk....
> > i know because i remember one time a guy from digium toldme where to put
> > it....
> >
>
>
> Hopefully you are now using DAHDI so I'll just comment about DAHDI loads
> the
> drivers.
>
> When you run "make config" in the dahdi-tools projects, a couple of
> different
> files are loaded that control the loading of modules.
>
> /etc/modprobe.d/dahdi.blacklist is used to instruct udev to *not*
> automatically
> load the drivers when the system is booting.  All the DAHDI drivers that
> support
> hardware devices are listed there in order to eliminate race conditions
> when the
> register their spans with the core dahdi driver.  Even though the wctc4xxp
> does
> not register a span, it is there to remain consistent.
>
> /etc/init.d/dahdi is the script that should be configured to run on boot to
> load
> your drivers and configure your spans.  This script reads
> /etc/dahdi/modules to
> determine which drivers it should load (by default, all the drivers are
> loaded).
>
> So you will want to make sure that wctc4xxp

do you mean wct4xxp ?
because wct4xxp is present in my setup while wctc4xxp is not.


> is in /etc/dahdi/modules, and then
> run /etc/init.d/dahdi start to load the driver.
>
> Cheers,
> Shaun
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081209/5b2725e0/attachment.htm