[asterisk-users] Dahdi, b410p and looping from 1 port to another

[Tzafrir Cohen]

On Mon, Dec 01, 2008 at 10:09:06AM +0100, Olivier wrote:
> Hi,
> 
> Hardware is b410p with :
> - span1 jumpers set to NT (no 100 ohm termination)
> - span2 jumpers set to TE (no 100 ohm termination)
> - straight cable from port1 to port2
> 
> Scheme:
> 
> --------------------
>                    1----------
>                    |          |   <------ cat5 patch cord
>                    2----------
>    B410P      |
>                    3
>                    |
>                    4
>                    |
> --------------------
> 
> 
> 
> /etc/dahdi/system.conf :
> span=1,0,0,ccs,ami
> bchan=1,2
> dchan=3
> span=2,1,0,ccs,ami
> bchan=4,5
> dchan=6

s/dchan/hardhdlc/

This is one of the defaults that needs changing in dahdi_genconf .
Probably will happen when we fix our BRI driver to support hardhdlc :-)

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir