[asterisk-users] X100P Card in OFFHOOK state

Jay Ray jonty_11 at yahoo.com
Thu Aug 28 15:07:05 CDT 2008


Hi,
   The settings provided did not work...the state is still OFF HOOK...

ANy other ideas?

--- On Tue, 8/26/08, Guillermo Salas M. <gsalas at manta.telconet.net> wrote:
From: Guillermo Salas M. <gsalas at manta.telconet.net>
Subject: Re: [asterisk-users] X100P Card in OFFHOOK state
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Date: Tuesday, August 26, 2008, 11:15 PM

El mar, 26-08-2008 a las 19:46 -0700, Jay Ray escribió:
> Any pointers on this one?
> 
> --- On Tue, 8/26/08, Jay Ray <jonty_11 at yahoo.com> wrote:
>         From: Jay Ray <jonty_11 at yahoo.com>
>         Subject: [asterisk-users] X100P Card in OFFHOOK state
>         To: asterisk-users at lists.digium.com
>         Date: Tuesday, August 26, 2008, 12:24 PM
>         
>         After I make a call o n the Zaptel Card X100P FXO module....it
>         remains offhook state as shown here...
>         
>         Signalling Type: FXS Kewlstart
>         Radio: 0re2uk*CLI>
>         Owner: <None>*CLI>
>         Real: <None>k*CLI>
>         Callwait: <None>I>
>         Threeway: <None>I>
>         Confno: -12uk*CLI>
>         Propagated Conference: -1
>         Real in conference: 0
>         DSP: noore2uk*CLI>
>         Relax DTMF: noCLI>
>         Dialing/CallwaitCAS: 0/0
>         Default law: ulaw>
>         Fax Handled: noLI>
>         Pulse phone: noLI>
>         Echo Cancellation: 128 taps, currently OFF
>         Actual Confinfo: Num/0, Mode/0x0000
>         Actual Confmute: No
>         Hookstate (FXS only): Offhook
>         
>         
>         
>         ------------------
>         Sometimes it still takes a new call while in this state and
>         sometimes rejects it...
>         How to correct it such that after I hangup a call it goes back
>         to onhook state...
>         
>         reloading wcfxo module using modprobe clears the issue....
>         


Sounds like your card is not detecting the busy tone, try adding the
following line at your zapata.conf file:

busydetect=yes
busycount=6



Best regards,

-- 
Guillermo Salas M.
Telconet S.A.
Calle 15 y Avenida 24 Esq
Edificio Barre #2 Primer Piso
Telefono : +593 5 262 8071
Celular  : +593 9 985 5138
e-mail   : gsalas at manta.telconet.net
www      : http://www.manta.telconet.net
           http://www.telcocarrier.net
SIP      : 666 at sip.manta.telconet.net
FWD      : 558563
USA      : 1 360 968 1701

Linux User: 255902

Beat me, whip me, make me use Windows!

Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html

Please avoid the Top Posting, see
http://es.wikipedia.org/wiki/Top-posting
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080828/e62742fc/attachment.htm 


More information about the asterisk-users mailing list