[asterisk-users] Zap channels stuck...

[Tzafrir Cohen]

On Fri, Aug 08, 2008 at 10:16:31AM -0500, Carlos Chavez wrote:
> 	My office Asterisk box has a TDM04B card for three land lines and a GSM
> gateway.  I have noticed that the Zap channels get stuck a couple times
> a week and I have to restart Asterisk to clear them.  Here is what I see
> in the console:
> 
> Connected to Asterisk 1.4.21.2 currently running on pbxoficina (pid =
> 18948)
> Verbosity is at least 3
> pbxoficina*CLI> core show channels verbose
> Channel              Context              Extension        Prio State
> Application  Data                      CallerID        Duration
> Accountcode BridgedTo           
> Zap/1-1              macro-stdexten       s                   1 Up
> Dial         SIP/2001|25|Ww            5554801230               general
> (None)              
> Zap/2-1              macro-stdexten       s                   1 Up
> Dial         SIP/2001|25|Ww            5554801230               general
> (None)              
> 2 active channels
> 28 active calls 
> 
> 	I have upgraded Asterisk and Zaptel to the latest stable version but I
> still have the same problem.  The other strange thing is that if I do a
> "service asterisk stop" it does kill the malfunctioning Asterisk process
> but I can see that it restarts immediately which is not supposed to
> happen.  This behavior is only present when there are stuck channels.
> When everything is ok it will properly stop asterisk and safe_asterisk.

Just the obvious question: you have tried soft hangup, right?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir