[asterisk-users] PRI device is down
Elliot Murdock
murdocke at gmail.com
Sun Aug 3 05:54:53 CDT 2008
Thanks Tzafrir,
This is what I get for various logs:
cat /proc/interrupts
CPU0 CPU1
0: 900209 0 XT-PIC timer
2: 0 0 XT-PIC cascade
5: 263 0 XT-PIC uhci_hcd:usb4, HDA Intel,
i915 at pci:0000:00:02.0
6: 2 0 XT-PIC uhci_hcd:usb1, ehci_hcd:usb5
7: 1 0 XT-PIC parport0
8: 50 0 XT-PIC rtc
9: 8 0 XT-PIC acpi, wct4xxp
10: 112574 0 XT-PIC eth0
11: 0 0 XT-PIC uhci_hcd:usb2, uhci_hcd:usb3
14: 24645 0 XT-PIC libata
15: 25758 0 XT-PIC libata
NMI: 0 0
LOC: 899964 899835
ERR: 0
MIS: 0
module unload chan_zap.so
-- Unregistered channel -2
-- Unregistered channel 1
...
-- Unregistered channel 122
-- Unregistered channel 123
-- Unregistered channel 124
CLI> module load chan_zap.so
[Aug 3 11:35:40] ERROR[5518]: chan_zap.c:9415 start_pri: Unable to
open D-channel 16 (Device or resource busy)
[Aug 3 11:35:40] ERROR[5518]: chan_zap.c:11327 setup_zap: Unable to
start D-channel on span 1
This is the output of /proc/zaptel/1:
Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 ClockSource
1 TE4/0/1/1 Clear (In use)
2 TE4/0/1/2 Clear (In use)
3 TE4/0/1/3 Clear (In use)
4 TE4/0/1/4 Clear (In use)
5 TE4/0/1/5 Clear (In use)
6 TE4/0/1/6 Clear (In use)
7 TE4/0/1/7 Clear (In use)
8 TE4/0/1/8 Clear (In use)
9 TE4/0/1/9 Clear (In use)
10 TE4/0/1/10 Clear (In use)
11 TE4/0/1/11 Clear (In use)
12 TE4/0/1/12 Clear (In use)
13 TE4/0/1/13 Clear (In use)
14 TE4/0/1/14 Clear (In use)
15 TE4/0/1/15 Clear (In use)
16 TE4/0/1/16 HDLCFCS (In use)
17 TE4/0/1/17 Clear (In use)
18 TE4/0/1/18 Clear (In use)
19 TE4/0/1/19 Clear (In use)
20 TE4/0/1/20 Clear (In use)
21 TE4/0/1/21 Clear (In use)
22 TE4/0/1/22 Clear (In use)
23 TE4/0/1/23 Clear (In use)
24 TE4/0/1/24 Clear (In use)
25 TE4/0/1/25 Clear (In use)
26 TE4/0/1/26 Clear (In use)
27 TE4/0/1/27 Clear (In use)
28 TE4/0/1/28 Clear (In use)
29 TE4/0/1/29 Clear (In use)
30 TE4/0/1/30 Clear (In use)
31 TE4/0/1/31 Clear (In use)
Span 2, 3, and 4 are the same except the span number.
pri show spans gives me:
s span
www*CLI> pri show spans
PRI span 1/0: Provisioned, Down, Active
PRI span 2/0: Provisioned, Down, Active
PRI span 3/0: Provisioned, Down, Active
PRI span 4/0: Provisioned, Down, Active
Thank you,
Elliot
On 8/3/08, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Sun, Aug 03, 2008 at 11:25:33AM +0300, Tzafrir Cohen wrote:
>> On Sun, Aug 03, 2008 at 10:05:46AM +0300, Elliot Murdock wrote:
>> > Hello,
>> >
>> > My Digium wct4xxp suddenly stopped working. Here are some of the logs:
>> >
>> > zap restart
>> > [Aug 3 10:02:55] WARNING[15050]: chan_zap.c:903 zt_open: Unable to
>> > specify channel 1: Device or resource busy
>> > [Aug 3 10:02:55] ERROR[15050]: chan_zap.c:7164 mkintf: Unable to open
>> > channel 1: Device or resource busy
>> > here = 0, tmp->channel = 1, channel = 1
>> > [Aug 3 10:02:55] ERROR[15050]: chan_zap.c:10471 build_channels:
>> > Unable to register channel '1-15'
>> > [Aug 3 10:02:55] WARNING[15050]: chan_zap.c:9768 zap_restart: Reload
>> > channels from zap config failed!
>> >
>> > I can supply other logs, but what can be wrong with the card/system?
>>
>> Can you try instead: 'module unload chan_zap.so' and then: 'module load
>> chan_zap.so' ?
>>
>> If that doesn't work, what is the output of:
>>
>> cat /proc/zaptel/*
>
> err... misread your message as "wctdm24xxp" instead of "wct4xxp". Try
> restarting asterisk of that 'unload' and 'load' doesn't work.
>
> --
> Tzafrir Cohen
> icq#16849755 jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406 mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list