[asterisk-users] Sending caller name out PRI?

[Peter A Eisch]

I have a PRI connected to a traditional PBX using NI-2 and a typical
config (further below).  When I call from a SIP/IAX phone to an extension
on the PBX, only the number makes it through.  If I plug that same port on
the PBX to a carrier the PBX presents both name and number.

Hints or pokes to relevant chapters in documentation?  My config is
essentially like one found here:
  http://www.voip-info.org/files/nortel-asterisk-0.2.pdf
The author makes no reference to CNID, so I'm assuming that he wasn't
bothered by it not working.

Ideas?

The system is a trixbox 2.6.0.7 which includes zaptel-1.4.9.2-8.

...
    -- Executing [s at macro-outbound-callerid:22] NoOp("SIP/3991-b7900488",
"CallerID set to "Peter" <NPANXX3991>") in ne
 Executed application: Noop
 Executed application: Macro
    -- Executing [s at macro-dialout-trunk:12] AGI("SIP/3991-b7900488",
"fixlocalprefix") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
  == Begin MixMonitor Recording SIP/3991-b7900488
    -- AGI Script fixlocalprefix completed, returning 0
 Executed application: AGI
    -- Executing [s at macro-dialout-trunk:13] Set("SIP/3991-b7900488",
"OUTNUM=4342") in new stack
 Executed application: Set
    -- Executing [s at macro-dialout-trunk:14] Set("SIP/3991-b7900488",
"custom=ZAP/g14") in new stack
 Executed application: Set
    -- Executing [s at macro-dialout-trunk:15] GotoIf("SIP/3991-b7900488",
"1?gocall") in new stack
    -- Goto (macro-dialout-trunk,s,17)
 Executed application: GotoIf
    -- Executing [s at macro-dialout-trunk:17] Macro("SIP/3991-b7900488",
"dialout-trunk-predial-hook|") in new stack
   Context 'macro-dialout-trunk-predial-hook' for macro
'dialout-trunk-predial-hook' lacks 's' extension, priority 1
 Executed application: Macro
    -- Executing [s at macro-dialout-trunk:18] GotoIf("SIP/3991-b7900488",
"0?bypass|1") in new stack
 Executed application: GotoIf
    -- Executing [s at macro-dialout-trunk:19] GotoIf("SIP/3991-b7900488",
"0?customtrunk") in new stack
 Executed application: GotoIf
    -- Executing [s at macro-dialout-trunk:20] Dial("SIP/3991-b7900488",
"ZAP/g14/4342|300|") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called g14/4342
Queuing frame from PRI_EVENT_PROCEEDING on channel 0/1 span 4
    -- Zap/73-1 is proceeding passing it to SIP/3991-b7900488
    -- Zap/73-1 is ringing
Echo cancellation already on
    -- Zap/73-1 answered SIP/3991-b7900488
...


zapata.conf (includes inline and comments purged)  Spans 3 and 4 connect
to the PBX.  (Yes the restating of the defaults are redundant, but I'm
willing to try any goofiness to make it work.)
-------
[trunkgroups]

[channels]

language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
faxdetect=incoming

group=0,11
context=from-carrier-custom
callerid=asreceived
usecallerid=yes
hidecallerid=no
switchtype = national
signalling = pri_cpe
pridialplan=national
prilocaldialplan=national
channel => 1-23
group=
context=default

; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
group=0,12
context=from-carrier-custom
callerid=asreceived
usecallerid=yes
hidecallerid=noswitchtype = national
signalling = pri_cpe
pridialplan=national
prilocaldialplan=national
channel => 25-47
group=
context=default

; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
group=0,13
context=from-nortel-custom
callerid=asreceived
usecallerid=yes
hidecallerid=no
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
faxdetect=incoming
switchtype = national
signalling = pri_net
pridialplan=national
prilocaldialplan=national
channel => 49-71
group=
context=default

; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
group=0,14
context=from-nortel-custom
callerid=asreceived
usecallerid=yes
hidecallerid=no
switchtype = national
signalling = pri_net
pridialplan=national
prilocaldialplan=national
channel => 73-95
group=
context=default

group=1