[asterisk-users] RAS with Asterisk and PRI

[Alexander Lopez]

If you want to do RAS (modem or data) I would suggest going with a
Portmaster PM3(Livingston, then purchased by Lucent, They are reliable
and pretty cheap. You can use Asterisk to route the calls into it if you
use a two port card.


You can find them at www.portmasters.com
pm-3a-2t-r  PM-3A-2T w/48 56k v.90 modems  $395.00 
$400.00 it will save you more in time and aggravation.


Alex


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Eric Wieling
> Sent: Tuesday, April 29, 2008 11:09 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] RAS with Asterisk and PRI
> 
> Many people think ZapRAS is for modem dialin.  None of the RAS stuff
> support modems, as far as I know.  The RAS stuff in Asterisk is for
> networking via ISDN, rather than modem.
> 
> Tzafrir Cohen wrote:
> > On Tue, Apr 29, 2008 at 02:36:36PM +0200, Tobias Wolf wrote:
> >> Hi all,
> >>
> >> i have found the two possible solution for doing RAS with Asterisk:
> >>
> >> 1) PPPD (http://www.voip-
> info.org/wiki/index.php?page=Asterisk+cmd+PPPD)
> >> I have downloaded the tgz proposed in the Wiki: app_pppd-060822.tgz
> >> But it do not compiler under Asterisk
1.2.9.1-BRIstuffed-0.3.0-PRE-1q.
> >>
> >> First this #if gave me an error
> >> #if (ASTERISK_VERSION_NUM >= 010400)
> >> #define ASTERISK_NEW_MODULE_INTERFACE
> >> #warning ASTERISK_NEW_MODULE_INTERFACE defined
> >> #endif
> >
> > This is for Asterisk 1.4 . There is bristuff for 1.4 (bristuff
0.4.x).
> > Or, alternatively, backport it yourself...
> >
> 
> --
> Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN,
QoS,
> T-1, PRI, Frame Relay, Linux, and network design.  Based near
> Birmingham, AL.  Now accepting clients worldwide.
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users