[asterisk-users] X101P [Re: buying cards from pakistan]

[Tzafrir Cohen]

On Wed, Apr 23, 2008 at 10:31:27PM +0200, giuliano curti wrote:
> (As you know) I'm trying a X101P card without success; some of
> the problems are:
> 
> > On Fri, 18 Apr 2008 11:30:46 -0400
> > "Steve Totaro" <stotaro at totarotechnologies.com> wrote:
> 
> > Is this region specific?
> 
> I bought that card in 2006 and I didn't realize the difference:
> how can I understand if my card is European or American specific?

The card was designed for the US. Some of its models will work later.

> 
> >  Do you get some of the DTMF but miss some?
> 
> the card does not recognize any dtmf;
>  
> > You may want to try relaxdtmf=yes or ....
> 
> doesn't work;
> 
> my situation is:
> 
> I started with asterisk-1.2.13~dfsg-2e + zaptel-1.2.11.dfsg-1 +
> zaptel-source-1.2.11.dfsg-1 + zaptel-modules-1.2.11.dfsg-1 on
> debian etch 4.0 r1: dmtf doesn't work (Tzafrir, why one needs to
> install the binary package zaptel-1.2.11.dfsg-1 and the source
> package zaptel-source-1.2.11.dfsg-1 to configure the card?);

zaptel-source is needed to build the package for your specific kernel.

That's: m-a a-i zaptel

> 
> yersteday I downloaded the zaptel-1.4.0, patched with oslec-0.1
> and compiled; I rmmod old wcfxo + zaptel and insmod the new oslec
> + zaptel + wcfxo without success;

Zaptel 1.4.0? 1.4.10, right?

> 
> I noted this problem: with the standard statement in zapata.conf
> 	signalling = fxs_ks
> asterisk console (reload chan_zap.so) give
> 	warning[2642] chan_zap.c: 11045 setup_zap ignoring
> signalling (the warning message disappears if I delete that
> statement): has sense?

What is the output of 'cat /proc/zaptel/1'

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir