[asterisk-users] zaptel 1.4.10 regression with TE220B on Proliant DL380 G5 ?

[Ex Vito]

On Fri, Apr 18, 2008 at 8:20 PM, Matthew Fredrickson <creslin at digium.com> wrote:
>
>  I just updated the branch.  Wait about 5-10 minutes in case for the
>  changes to get mirrored, and then try updating and doing it again.
>

  Looks better, no more soft lockup and ztcfg time is comparable to
  1.4.9.2's:

  # time ztcfg
  real    0m4.719s
  user    0m0.000s
  sys     0m0.044s

  # dmesg | tail  ...

Zapata Telephony Interface Registered on major 196
Zaptel Version: SVN-mattf-zaptel-1.4-stackcleanup-r4177
Zaptel Echo Canceller: MG2
PCI: Enabling device 0000:12:01.0 (0150 -> 0153)
ACPI: PCI Interrupt 0000:12:01.0[A] -> GSI 25 (level, low) -> IRQ 138
wcte12xp: Setting up global serial parameters for T1
wcte12xp: Found a Wildcard TE122
Found TE2XXP at base address fdff0000, remapped to f8850000
TE2XXP version c01a016a, burst ON
Octasic optimized!
FALC version: 00000005, Board ID: 00
Reg 0: 0x36dbd400
Reg 1: 0x36dbd000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x00000101
Reg 5: 0x00000000
Reg 6: 0xc01a016a
Reg 7: 0x00001300
Reg 8: 0x010200ff
Reg 9: 0x00fd0001
Reg 10: 0x0000004a
TE2XXP: Launching card: 0
TE2XXP: Setting up global serial parameters
Found a Wildcard: Wildcard TE220 (4th Gen)
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
Registered tone zone 25 (Portugal)
wcte12xp: Span configured for ESF/B8ZS
About to enter startup!
TE2XXP: Span 1 configured for CCS/HDB3/CRC4
timing source auto card 0!
wct2xxp: Setting yellow alarm on span 1
SPAN 2: Primary Sync Source
timing source auto card 0!
VPM400: Not Present
wcte12xp: Setting yellow alarm
VPM450: echo cancellation for 64 channels
wcte12xp0: Missed interrupt. Increasing latency to 4 ms in order to compensate.
VPM450: hardware DTMF disabled.
VPM450: Present and operational servicing 2 span(s)
Completed startup!
About to enter startup!
TE2XXP: Span 2 configured for CCS/HDB3/CRC4
wct2xxp: Setting yellow alarm on span 2
timing source auto card 0!
SPAN 3: Secondary Sync Source
Completed startup!


--
 exvito