[asterisk-users] wcfxo and X100P card won't play nice.

[Tzafrir Cohen]

On Wed, Apr 16, 2008 at 09:44:25AM -0500, Brent Davidson wrote:
> Alex Balashov wrote:
> > Greetings,
> >
> > This may have already been asked many times, but I cannot seem to find a 
> > satisfactory and consistent answer anywhere.
> >
> > I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850 
> > or 2650 (cannot recall):
> >
> > 00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
> > 00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
> > 00:00.2 Host bridge: Broadcom CMIC-LE
> > 00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
> > 00:04.1 Class ff00: Dell Remote Access Card III
> > 00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
> > 00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
> > 00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
> > 00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
> > 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
> > 00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
> > 00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> > 00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> > 00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> > 00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
> > 01:06.0 Communication controller: Motorola Wildcard X100P
> > 03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 
> > Gigabit Ethernet (rev 15)
> > 03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 
> > Gigabit Ethernet (rev 15)
> > 04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI 
> > Bridge (rev 01)
> > 04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller 
> > 3/Di (rev 01)
> >
> > But, wcfxo won't recognise it:
> >
> > NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
> > Failed to initailize DAA, giving up...
> > wcfxo: probe of 0000:01:06.0 failed with error -5
> >
> > This is running on a custom-compiled kernel 2.6.24.3 with Asterisk 
> > 1.4.18 and Zaptel 1.4.10.
> >
> > Any ideas?
> >
> > -- Alex
> >
> >   
> Is that a genuine X100P or a clone?  Looks like a modem that has been 
> made to look like an X100P.

What's the difference?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir