[asterisk-users] tdm410p w/ echo - no full duplex

Michael J. Liberatore mike240se at straightandnarrowinc.org
Fri Apr 11 15:00:44 CDT 2008


Matthew, I have just emailed support.  Do you know what the latest
revision is?

Also, is it ok for mg2 to be in zconfig.h and echocancel=yes ?  It will
know automatically to use the hw ec rather than the software one?

 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matthew
Fredrickson
Sent: Friday, April 11, 2008 11:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] tdm410p w/ echo - no full duplex

Michael J. Liberatore wrote:
> hi, i just installed 2 new tdm410p's on asterisk 1.4.19 with zaptel 
> 1.4.10.  They have the hardware echo cancellers.  I am having an issue

> though, when i talk, it cuts out the other end.  So for example, i 
> called up another asterisk box and was listening to the prompts and as

> they were playing if i said something, it would cut out the other end.
>  
> so i basically started counting and for the 20 seconds i counted, 
> nothing came through from the otherside.
>  
> i tried from multiple phones and this didnt happen with the old
tdm400.
> 
>  
> is this an issue with the card?  Is it because zaptel has mg2 on?  
> Does than mean i am using 2 echo cancellers?  the hardware one and the
mg2?
> how should this be set?  also, it says  "echo canceller could not be 
> trained" or something like that at the start of every call on the cli.

It sounds like you need the new revision of the firmware.  Please
contact technical support and they should be able to get it to you.

Matthew Fredrickson

>  
>  
>  
> thanks
>  
> mike
>  
> 
> 
> This E-mail, including any attachments, may be intended solely for the

> personal and confidential use of the sender and recipient(s) named 
> above. This message may include advisory, consultative and/or 
> deliberative material and, as such, would be privileged and 
> confidential and not a public document. Pursuant to 42 CFR, any 
> information in this e-mail identifying a former, present, or potential
client of Straight & Narrow is confidential. If you have received this
e-mail in error, you must not review, transmit, convert to hard copy,
copy, use or disseminate this e-mail or any attachments to it and you
must delete this message. You are requested to notify the sender by
return e-mail.
> 
> 
> 
> 
> ----------------------------------------------------------------------
> --
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


--
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list