[asterisk-users] TDM400P Dialtone problem

[Faraz R. Khan]

Did you provide power to the card? FXS extensions need power.

On Fri, 2008-04-11 at 08:11 +0300, Murithi Martin wrote:
> Hi Guys,
> I have a TDM400P (2FXS and 2FXO) installed on my asterisk (1.4.18.1)
> Zaptel (1.4.9.2) running on Fedora Core 7, below are my configurations
> and some diagnosis I did. The problem is when I connect an analogue
> phone on either of the FXS channels I don't get a dialtone, I can't
> call any of the sip clients or even call my echo test, number, which
> is an context included in that of the FXS port.
> How can I solve this problem? Please assist.
> 
> After doing a /sbin/ztcfg -vv, after listing the zaptel channels
> configuration it says 4 channels to configure instead of 4 channels
> configured. is there any additional configuration or dependency I need
> to load (I've done modprobe wctdm and modprobe zaptel before doing
> /sbin/ztcfg -vv).
> 
> 
> zaptel.conf
> # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER)
> fxoks=1
> fxoks=2
> fxsks=3
> fxsks=4
> 
> # Global data
> 
> loadzone = us
> defaultzone = us
> 
> 
> zapata.conf
> [trunkgroups]
> ; define any trunk groups
> 
> [channels]
> ; hardware channels
> 
> ;language=en
> ;context=from-zaptel
> ;signalling=fxs_ks
> ;rxwink=300 ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> usedistinctiveringdetection=yes
> ; default
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> ;echotraining=800
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> 
> ;group=0
> callgroup=1
> pickupgroup=1
> immediate=no
> context=phone
> signalling=fxo_ks
> channel => 1
> ;callerid=
> ;mailbox=
> ;group=
> context=phone
> 
> ;;; line="2 WCTDM/0/1 FXOKS (In use)"
> signalling=fxo_ks
> ;context=phone
> channel => 2
> ;callerid=
> ;mailbox=
> ;group=
> context=incoming
> 
> ;;; line="3 WCTDM/0/2 FXSKS (In use)"
> signalling=fxs_ks
> ;callerid=asreceived
> ;group=0
> channel => 3
> context=incoming
> 
> ;;; line="4 WCTDM/0/3 FXSKS (In use)"
> signalling=fxs_ks
> ;callerid=asreceived
> ;group=0
> ;context=incoming
> channel => 4
> ;context=default
> 
> 
> 
> [root at localhost /]# /sbin/ztcfg -vv
> 
> Zaptel Version: 1.4.9.2
> Echo Canceller: MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXO Kewlstart (Default) (Slaves: 01)
> Channel 02: FXO Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
> 
> 4 channels to configure.
> 
> 
> 
> 
> Asterisk CLI
> core score show channeltypes
> Type Description Devicestate Indications Transfer
> ---------- ----------- ----------- ----------- --------
> Feature Feature Proxy Channel Driver no yes no
> IAX2 Inter Asterisk eXchange Driver (Ver 2) yes yes yes
> Local Local Proxy Channel Driver yes yes no
> SIP Session Initiation Protocol (SIP) yes yes yes
> Phone Standard Linux Telephony API Driver no yes no
> MGCP Media Gateway Control Protocol (MGCP) yes yes no
> Agent Call Agent Proxy Channel yes yes no
> ----------
> 7 channel drivers registered.
> 
> *CLI> module reload chan_zap.so
> No such module 'chan_zap.so'
> 
> *CLI>
-- 
Faraz R Khan
Chief Architect
Emergen Consulting Pvt Ltd
+92.21.111.111.320 x200
www.emergen.biz