[asterisk-users] DTMF between Asterisk servers.

[Mark Hamilton]

I find it  hard to believe no one knows, so is it just plain no helping? J

If someone would like to atleast point me in the right direction that will
deal specifically with what I'm asking, that would be appreciated too.

 

Much thanks.

 

From: Mark Hamilton [mailto:mark.h at cage151.com] 
Sent: April 7, 2008 11:48 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: DTMF between Asterisk servers.

 

Hello, 

 

I'm a little confused on DTMF.

A sip peer is registered on two Asterisk servers. No dtmfmode is set for
them, the sip peer is 999 on Asterisk 1 and 999 on Asterisk 2. They both
register on each other.

 

A call comes in on Asterisk server 1, provider 1, dtmf=inband. Then the call
is transferred to Asterisk 2:

RetryDial(/var/lib/asterisk/sounds/connecting,15,10,SIP/12351 at 65.xx.xx.10,,t
T,)

Where 12351 accepts the call on Asterisk 2, and in some cases, that call is
transferred out to a PSTN number, or wherever, but not within Asterisk
anymore via provider2, dtmf=rfc2833.

 

When the call comes in, I'd like it to relay DTMF just dandy. How can I do
so?

There is no NAT between the Asterisk servers or in front of them. However,
Asterisk2 has iptables which allows all UDP traffic  to/fro Asterisk1. When
Asterisk2 transfers the call to external endpoints, there might be a LAN,
but relative ports are open on those LANs.

 

Please help.

 

Thanks in advance,

Mark.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080408/030eb189/attachment.htm