[asterisk-users] ztdummy

[Tony Mountifield]

In article <47F4C604.1060301 at pagestation.com>,
Jerry Geis <geisj at pagestation.com> wrote:
> What does it take to get ztdummy to work correctly?
> 
> I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 
> 1.4.9.2
> Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs.
> Problem is playback() does not work. So then I stop zaptel, asterisk 
> runs and playback() now
> works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for 
> that.
> 
> I am running Centos 5.1 with the latest kernel and fully updated.
> 
> How can I get ztdummy to work? There are no cards in the laptop.
> I typically dont run asterisk on a laptop - but thats what the situation 
> needed...

Jerry, the first thing to check is "cat /proc/interrupts" and see if there
is an entry for rtc on IRQ 8. There should be, and the interrupt counts
on there should be going up at approximately 1024 per second.

What kernel version are you using? (uname -a)

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org