[asterisk-users] Need some input for Quad T1 and channel banks.

[Andrew Latham]

Here I will say it.... http://xorcom.com



On Mon, Mar 31, 2008 at 6:01 PM, Al lists <asteriskal at gmail.com> wrote:
> I'm looking to install a system with 80 FXS analog phones.
> At this time the only cost effective solution is using a 4 port T1 card and
> addit 600 channel bank.
> Has anyone tried this solution? any good documents beside
> http://www.voip-info.org/wiki/index.php?page=Asterisk+hardware+channel+bank+check
>  as far as i know, addit 600 T1 interface is not PRI (please correct me if
> i'm wrong) its CAS robbed bit, will that work with new Digium quad T1 like
> TE410P ?( I prefer to use Digium if possible)
> The system is connected to the Telco through SIP trunk so all we have in
> terms of analog is local loop, Do we need to have echo cancel in this
> scenario ?
>  Thanks!
>
>
>
> _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
/*
 Andrew Latham
 LATHAMA (lay-th-ham-eh)
 lathama at lathama.com
 lathama at gmail.com

 TuxTone Inc.
 http://www.TuxTone.com
*/