[asterisk-users] ChanSpy issue

[Wai Wu]

The parameter to Chanspy should be the whole or part of the channel name. I do not understand what you mean by "sip trunk". It make perfect sense that you can hear both streams of voice when you use the phone's extension as Asterisk usually uses "SIP/extension+xxx" as the channel name of the call.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com on behalf of Ed Nuñez
Sent: Wed 9/26/2007 4:48 PM
To: asterisk-users-bounces at lists.digium.com
Cc: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] ChanSpy issue
 
 

Hello list

 

I am having an issue with Chanspy/SIP that I'm hoping someone has come
across and resolved in the past.

 

I am sending calls that come in TDM through T1 ZAP channels and go out to a
SIP trunk.

 

If I spy on the SIP channel, I can hear the person on the SIP side of the
call just fine, but the person on the ZAP channel fades in and out.

If I spy on the ZAP channel, and can hear both sides just fine, but I don't
know who I am spying on since I have other calls coming in on the same T1.

 

If I spy on a SIP extension instead of a SIP trunk, I hear both sides just
fine.

 

I am using a recent version of Asterisk 1.2 and I am using g729 licenses.

 

This is the command I am using to spy.

 

exten => 8011,1,ChanSpy(Sip/SIPTRUNK|bqv(4))

 

 



 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070926/1fa4b198/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 13579 bytes
Desc: image001.png
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070926/1fa4b198/attachment-0001.png