[asterisk-users] g729 on 1.4.10.1

[Scott Moseman]

Here's what I'm showing in the logs...

[Sep 18 09:52:09] VERBOSE[2786] logger.c:   == Registered file format
g729, extension(s) g729
[Sep 18 09:52:09] VERBOSE[2786] logger.c: format_g729.so => (Raw G729 data)
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: G.729 transcoding module
version 32, Copyright (C) 1999-2007 Digium, Inc.
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This module is supplied
under a commercial license granted by Digium, Inc.
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Please see the full
license text supplied by the accompanying
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: "register" utility, or
ask for a copy from Digium.
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: This product includes
software developed by the OpenSSL Project
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: for use in the OpenSSL
Toolkit. (http://www.openssl.org/)
[Sep 18 09:52:09] NOTICE[2786] codec_g729.c: Copyright (C) 1998-2006
The OpenSSL Project
[Sep 18 09:52:09] VERBOSE[2786] logger.c:   == G.729 Host-ID: x:x:x:etc
[Sep 18 09:52:09] WARNING[2786] codec_g729.c: Failed to initialize
G.729 copy protection!
[Sep 18 09:52:09] VERBOSE[2786] logger.c: codec_g729a.so => (Annex A/B
(floating point) G.729 Codec (optimized for i686))

Any ideas where this points me?

Thanks,
Scott



On 9/17/07, Scott Moseman <scmoseman at gmail.com> wrote:
>
> What's the best way to debug what's going on within Asterisk?
> I turned up the 'core debug', but that did not give me what I was
> hoping to find.  I'm hoping to see some kind of error that explains
> why it will not pass through the g729 codec.
>
> Thanks,
> Scott
>
>
> On 9/14/07, Scott Moseman <scmoseman at gmail.com> wrote:
> >
> > I have a fresh 1.4.10.1 installation that appears to have a problem
> > with g729 pass-through.  I can see the gateway in question sending
> > an INVITE using g729b.  However, the Asterisk is only sending g711
> > in the INVITE to my Polycom phone.
> >
> > [gateway]
> > disallow=all
> > allow=g729
> >
> > [phone]
> > disallow=all
> > allow=ulaw
> > allow=alaw
> > allow=g729
> >
> > There's the codec configs for the gateway and the phone in question.
> > I even attempted to setup the phone with only the allow=g729, but in
> > that instance it won't even complete the call.  We had to add g711
> > support to the gateway in question for now to get it up and running,
> > but we want to get it back to using only g729.
> >
> > CLI> show modules like g729
> > Module                         Description
> >  Use Count
> > format_g729.so                 Raw G729 data
> >  0
> > codec_g729a.so                 Annex A/B (floating point) G.729 Codec
> > ( 0
> > 2 modules loaded
> >
> > I downloaded the pre-compiled g729 module from Digium.  The sip.conf
> > references g729 and the codec module is loaded.  Unless there's
> > anything else I need to do that I'm missing?
> >
> > Thanks,
> > Scott
> >
>