[asterisk-users] Partitioning DSL input

[Al lists]

Although you can find a router with QOS or dedicated bandwidth feature,
I would suggest a QOS enabled Switch.
Any IEEE802.1p enables switch,(these days less than $100 for 16 port) can do
the job.
you cant do alot when your traffic reaches internet, thats why most you can
do is up to your modem.
cos bit works best at layer 2 , and pretty much TOS is useless if you dont
own your wlan line.


On 9/10/07, David Gomillion <david.gomillion at gmail.com> wrote:
>
>
>
> On 9/10/07, Ira <ira at extrasensory.com> wrote:
> >
> > At 02:11 PM 9/10/2007, you wrote:
> >
> > >Can people on this list share their experiences on how they
> > >partition a DSL for small business internet service with a router so
> > >that a portion is dedicated to VOIP and another portion to
> > >computers.  Of course, the idea is to do this with a low cost router
> > >(under $100).
> >
> >
> > dd-wrt or Sveasoft on a Linksys router though I understand there are
> > better choices in routers today.
>
>
> Don't expect too much out of traffic shaping. While it should work nearly
> perfectly upstream, there's only so much you can do to control the
> downstream (from your ISP to you).
>
>
>
> _______________________________________________
>
> Sign up now for AstriCon 2007!  September 25-28th.
> http://www.astricon.net/
>
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070911/d8691965/attachment.htm