[asterisk-users] New Installed X100p

[Tzafrir Cohen]

On Fri, Sep 07, 2007 at 12:02:29AM -0700, G B wrote:
> 
> Hi,
> 
> I just installed an X100p knockoff (OpenVox a100lp). I have seen my 
> errors in the mailing list but without resolution. It seems that the 
> . other problems had to do with IRQ sharing. 

Sharing IRQ lines should generally not prevent a driver from loading. It
may be related to performance issues. It is also an easy target to blame
performance issues for.

> However, it doesn't seem 
> like the X100p is sharing an IRQ channel with anything. Any ideas?
> 
> Also, I am running on Ubuntu Fiesty with Zaptel 1.4.5.1 and Asterisk 
> 1.4.11.1. Thanks in advance.
> 
> My commands below are preceded with '#'
> 
> # less /etc/zaptel.conf
> 
> fxsks=1
> loadzone=us
> defaultzone=us
> 
> # ztcfg -vv
> 
> Zaptel Version: 1.4.5.1
> Echo Canceller: MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> 
> 1 channels configured.
> 
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)

Ignore that message for the moment. This is from the needless automatic
run of ztcfg at module probe.

> 
> # dmesg | grep wcfxo
> 
> [   39.337283] wcfxo: probe of 0000:00:0c.0 failed with error -5

Now, please look at /var/log/kern.log, or in the output of dmesg and
give a number of extra lines around that. Generally the driver has
failed to start using that specific card.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir