[asterisk-users] ztcfg error : TE110p error with " CAS signalling on span 1 conflicts with HDLC with ...

[Tzafrir Cohen]

Off-topic to the original thread. I just wonder what you meant in your
configuration:

On Wed, Sep 05, 2007 at 09:58:19PM -0700, satish patel wrote:
> I have the same setup asterisk-1.4.11 with TE120P two port E1 card 
> with is connected with avaya system but signaling is Qsig becase i 
> want unified dialplan
> 
> my configuration
> /etc/zaptel.conf
> ########### Digium TE120P Card Configuration #########
> # E1 port 1
> span=1,1,0,ccs,hdb3

'1' in the timing parameter: You tell Zaptel to take timing from that
span.

> bchan=1-15,17-31
> dchan=16
> # E1 port 2
> span=2,0,0,ccs,hdb3

'0' in the timing parameter. You tell asterisk not to take timing from
that span (and hence implicitly provide timing).

> bchan=32-46,48-62
> dchan=47
> 
> loadzone = in
> defaultzone=in
> 
> 
> /etc/asterisk/zapata.conf

And what do you use for switchtype?

> group=1
> context=from-avaya
> signalling=pri_net
> channel => 1-15,17-31

Span 1 (you timing master) is the Avaya?

> 
> group=2
> context=from-pstn
> signalling=pri_cpe
> channel => 32-46,48-62

Span 2 is the PSTN?

> 
> *Notes : - my avaya system clock is slave mode and my asterisk is 
> master thats why i use pri_net  on avaya

So you take timing from the Avaya switch rather than from the PSTN?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir