[asterisk-users] Eicon Diva and incoming Fax

[Armin Schindler]

On Mon, 15 Oct 2007, voip crazy wrote:
> Dear Armin,
>
> the problem is my Eicon Diva Card does not detect aany fax-tone. Then the
> call is redirect as a voice call instead a fax call.
>
> How could I detect the fax.-tone with this kind of hardware?
> How could I enable receivefax?

Are we talking about a DIVA Server BRI card?
If yes, then the card can detect fax tone and you just need
to enabled this in capi.conf.
Then capicommand(receivefax|...) will help you.

Armin

> 2007/10/15, Armin Schindler <armin at melware.de>:
>>
>> Hello VoipCrazy !?
>>
>> On Mon, 15 Oct 2007, voip crazy wrote:
>>> Hello all,
>>>
>>> I am trying to set up asterisk and hylafax to send and receibe fax. The
>>> machine is connected to the PSTN is an Eicon Diva BRI (1 BRI port).
>>> My problem is that , when I send a Fax from the PSTN to this
>> machine,  the
>>> asterisk or diva or hylafax, does not detect this call as a fax and
>> asterisk
>>> answer that call like a voice call.
>>>
>>> How sould I configure the software modem (iaxmodem) to use with the
>> Eicon
>>> Diva card?
>>> What sould I do to make the Eicon Diva detects an incoming fax?
>>
>> If asterisk shall not accept this call, then configure asterisk not to do
>> so. Either use another number, or check the transfercapability (if the
>> sender did set this correct).
>> Why don't you receive the fax via asterisk? You can answer the call and if
>> a fax-tone is detected, you switch to receivefax.
>>
>> Armin
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>