[asterisk-users] Registration state: Failed

[Newbie]

Hi, 
I am using the OS which bundled with AsteriskNow


  ----- Original Message ----- 
  From: Vivek Shrivastava 
  To: Newbie 
  Cc: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Saturday, December 01, 2007 12:25 PM
  Subject: Re: [asterisk-users] Registration state: Failed


  Hmmm, what OS you are using,,,this could be related to "Access Control Lists"..but i guess that is in Solaris  


  On 11/30/07, Newbie <newbie at pbxsoftwares.com> wrote: 
    Hello,

    After I turned on "full=>" in logged.conf .. I got the following:

    [Nov 30 12:00:25] NOTICE[2601] chan_sip.c: Registration from 'FXS1 <sip:998 at 172.16.1.74>' failed for ' 172.16.1.169' - Device does not match ACL
    [Nov 30 12:00:29] NOTICE[2601] chan_sip.c: Registration from 'FXS1 < sip:998 at 172.16.1.74>' failed for ' 172.16.1.169' - Device does not match ACL
    [Nov 30 12:00:33] NOTICE[2601] chan_sip.c: Registration from 'FXS1 < sip:998 at 172.16.1.74>' failed for '172.16.1.169' - Device does not match ACL
    [Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 < sip:999 at 172.16.1.74>' failed for ' 172.16.1.169' - Device does not match ACL
    [Nov 30 12:00:35] NOTICE[2601] chan_sip.c: Registration from 'FXO1 < sip:999 at 172.16.1.74>' failed for '172.16.1.169' - Device does not match ACL
    [Nov 30 12:00:36] NOTICE[2601] chan_sip.c: Registration from 'FXO1 < sip:999 at 172.16.1.74>' failed for ' 172.16.1.169' - Device does not match ACL
any idea or clue?
Thanks a lot in advance
Regards
Winanjaya
 
      ----- Original Message ----- 
      From: Vivek Shrivastava 
      To: Newbie 
      Cc: Asterisk Users Mailing List - Non-Commercial Discussion 
      Sent: Saturday, December 01, 2007 11:50 AM
      Subject: Re: [asterisk-users] Registration state: Failed

       
      well, then i would recommend to see "full" log in debug mode that might give some clue. if you have not done this before you can uncomment line starting with "full=>" in the logger.conf... the log will be the usual /var/log/asterisk/ directory. 

      Thanks,

      Vivek 

       
      On 11/30/07, Newbie <newbie at pbxsoftwares.com > wrote: 
        Hi, 
        there is no problem with X-Lite, the problem is SPA-3102 shown:

        Line 1:
        Registration Status: Failed

        PSTN Line 1:
        Registration Status: Failed

        I also had added 1 more extension 251..then tried to call 251 from 250 by using X-Lite and it works perfectly.. so that's why I am sure there is no problem with X-Lite .. what I suspect is the problem on Registration process in AsteriskNow.. 

        since I am very new with this.. I don't know why this problem occurs ... could any body please help?

        Thanks & Regards
        Winanjaya

        [general]
        context=default
        allowoverlap=no
        bindport=5060
        bindaddr=0.0.0.0
        srvlookup=yes 
        videosupport=yes
        disallow=all
        allow=ilbc
        allow=gsm
        allow=ulaw
        allow=h261
        allow=h263
        allow=h263p
        register=998:1234 at line1/998
        register=999:1234 at pstnline1/999

        [line1]
        type=peer
        host=dynamic
        defaultip=172.16.1.74
        fromuser=998
        secret=1234
        fromdomain=172.16.1.169

        [line2]
        type=peer
        host=dynamic
        defaultip=172.16.1.74
        username=999
        secret=1234
        fromdomain=172.16.1.169

Command> sip show peers

Name/username              Host            Dyn Nat ACL Port     Status               
pstnline1/999              (Unspecified)    D          0        Unmonitored           
line1                      (Unspecified)    D          0        Unmonitored           
250/250                    172.16.1.88      D          27778    Unmonitored           
2500                       (Unspecified)    D          0        Unmonitored           
251                        (Unspecified)    D          0        Unmonitored           
5 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 4 offline]

 
 

         

        ----- Original Message ----- 
          From: Vivek Shrivastava 
          To: Newbie ; Asterisk Users Mailing List - Non-Commercial Discussion 
          Sent: Saturday, December 01, 2007 11:34 AM
          Subject: Re: [asterisk-users] Registration state: Failed

           
          Hi,

          x-lite has extensive debug facility you can turn that on in the advanced options, that probably will give better understanding as what is going on from x-lite side. i also have experienced the same but that involved firewall and NAT issues. 

          Thanks,

          Vivek

           
          On 11/30/07, Newbie <newbie at pbxsoftwares.com > wrote: 
            Dear Support,

            I am running AsteriskNow + X-Lite as my SoftPhone and SPA-3102 connected with PSTN line.

            I have 3 extensions:

            250 -> my extension
            998 -> I configured as Line 1 in SPA-3102
            999 -> I configured as PSTN Line 1 in SPA-3102

            I have created 998 and 999 to the user extension list of the AsteriskNow

            why I still got Registration state: Failed for both Line 1 status and PSTN Line status ?


            my topology is below:

            Users <--> AsteriskNow <--> SPA-3102 <--> PSTN line

            Please help

            Thanks  a lot in advance

            Regards
            Winanjaya



            _______________________________________________
            --Bandwidth and Colocation Provided by http://www.api-digital.com--

            asterisk-users mailing list
            To UNSUBSCRIBE or update options visit:
              http://lists.digium.com/mailman/listinfo/asterisk-users







-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071201/96005605/attachment.htm